ECRESO FM 5kW / 10kW, user manual
–
11/2021
Page 162
WorldCast Systems SAS - 20 avenue Neil Armstrong - 33700 Mérignac (Bordeaux Métropole) FRANCE
+33 (0)5 57 928 928
–
www.worldcastsystems.com
–
contact@worldcastsystems.com
8.6.2.
Product configuration
Path:
System
/Product/Configuration
Set various application parameters.
Check the box if line 2 is an MPX input, uncheck if line 2 is an audio input.
When Line 2 is set as a digital MPX input, set the MPX 3 and MPX 4 parameters in the Transmitter configuration
pages (section 8.4).
Set the parameters with which SmartFM savings are calculated.
If a driver not managed by the Ecreso FM control unit is used, set the exciter management as External.
!
In external mode, the driver’s RF
must
be enabled before the transmitter’s RF to a
void power overshoots.
8.6.3.
Product Backup
Path:
System
/Product/Backup
