ECRESO FM 5kW / 10kW, user manual
–
11/2021
Page 170
WorldCast Systems SAS - 20 avenue Neil Armstrong - 33700 Mérignac (Bordeaux Métropole) FRANCE
+33 (0)5 57 928 928
–
www.worldcastsystems.com
–
contact@worldcastsystems.com
8.6.9.
SNMP Manager
Path:
System
/SNMP/SNMP Manager
▪
SNMP Actions
The user may replay traps that have not been acknowledged yet.
The user may also delete pending traps that have not been acknowledged yet.
▪
SNMP manager settings
The equipment enables multiple addresses to be configured for SNMP notifications. Any of the configured
managers can acknowledge traps.
The unit is compliant with SNMPv1 and SNMPv2c versions. Notifications can be transmitted as SNMPv1,
SNMPv2c or Inform SNMPv2c type traps. Select the notification type for all traps of a given manager
SNMPv1 and SNMPv2c type traps are sent
n
times (Number of repeats) before they are deleted from the
queue.
Case of Inform SNMPv2c type traps:
Inform SNMPv2c traps require manager acknowledgment.
A trap is sent
n
times (Number of repeats) and stored in a queue.
If the trap is acknowledged, it is deleted from the queue.
If the trap is not acknowledged, it will be sent up to
m
times (Max attempts) in a
t
delay (Ack timeout). After
m
tries, the trap is deleted even if it has not been acknowledged.
The queue uses the FIFO principle. It the number of traps in the queue becomes too great, the oldest traps
will be deleted, even if they have not been acknowledged. The size of the queue is set on the SNMP Agent
page (Max pending traps).
