YOMANI
PRODUCT MANUAL
16
PUBLIC
last updated 8/11/13
document release 2.1
pm_ymn_keyFeatures.fm
Reset button
If the YOMANI terminal locks up for any reason, you can reset it by pushing the Reset
button at the back of the terminal. Push the button very firmly with a pencil or some other
pointed object and hold it until the screen goes blank. Release the Reset button and wait
for the terminal to reboot.
Note:
the time the terminal takes to reboot depends on the applications installed.
Figure 15. Terminal Reset button
Stand-by function
To save energy, YOMANI can automatically switch to stand-by mode after, for example,
finalizing the transaction. This function is software controlled. Some background
processes (for example the optional GSM/GPRS) remain active, and pressing any key
(or inserting a card) makes the terminal fully active in only a second.
In stand-by mode
•
YOMANI ML consumes only 0.16 W, as against an average of 1.27 W in operation
•
YOMANI XR consumes only 0.19 W, as against an average of 1.41 W in operation
(1.92 W with ticket printing)
Buzzer
YOMANI is equipped with a multi-tone buzzer for audible feedback to the user.
Summary of Contents for YOMANI
Page 1: ...PRODUCT MANUAL an atos company YOMANI colourful innovation product picture 4 014 x 3 596...
Page 6: ...YOMANI PRODUCT MANUAL iv empty for double sided printing pManual_ymnTOC fm...
Page 8: ...YOMANI PRODUCT MANUAL vi empty for double sided printing pManual_ymnLOF fm...
Page 38: ...YOMANI PRODUCT MANUAL 32 empty for double sided printing pm_ymn_accessories fm...
