Group 01
Safety
TX03679,00016CC -19-03JAN07-1/1
TX03679,00016F9 -19-03JAN07-1/1
TX03679,00016FA -19-03JAN07-1/1
Recognize Safety Information
This is the safety alert symbol. When this symbol is
noticed on the machine or in this manual, be alert for
the potential of personal injury.
Follow the precautions and safe operating practices
highlighted by this symbol.
A signal word — DANGER, WARNING, or CAUTION —
is used with the safety alert symbol. DANGER identifies
the most serious hazards.
On the machine, DANGER signs are red in color,
WARNING signs are orange, and CAUTION signs are
yellow. DANGER and WARNING signs are located near
specific hazards. General precautions are on CAUTION
labels.
T133555
—UN—15APR13
T133588
—19—28AUG00
Follow Safety Instructions
Read the safety messages in this manual and on the
machine. Follow these warnings and instructions carefully.
Review them frequently.
Be sure all operators of this machine understand every
safety message. Replace operator's manual and safety
labels immediately if missing or damaged.
T133556
—UN—24AUG00
Operate Only If Qualified
Do not operate this machine unless the operator's manual
has been read carefully, and you have been qualified by
supervised training and instruction.
Operator should be familiar with the job site and
surroundings before operating. Try all controls and
machine functions with the machine in an open area
before starting to work.
Know and observe all safety rules that may apply to every
work situation and work site.
TM2052 (17JUL18)
27C ZTS and 35C ZTS Operation & Tests
071718
PN=9
Summary of Contents for 27C ZTS
Page 4: ...Introduction TM2052 17JUL18 27C ZTS and 35C ZTS Operation Tests 071718 PN 4...
Page 7: ...Contents TM2052 17JUL18 ii 27C ZTS and 35C ZTS Operation Tests 071718 PN 2...
Page 9: ...Contents TM2052 17JUL18 9000 2 27C ZTS and 35C ZTS Operation Tests 071718 PN 2...
Page 21: ...Contents TM2052 17JUL18 9005 2 27C ZTS and 35C ZTS Operation Tests 071718 PN 2...
