KTD1020
/ English Instruction Manual
7
OPERATION YOUR REMOTE CONTROL
1. Press and slide the back cover to open the battery compartment of the remote control.
2. Insert two AAA size batteries. Make sure the (+) and (-) ends of the batteries match
the (+) and (-) ends indicated in the battery compartment.
3. Close the battery compartment cover.
GETTING STARTED / SET UP
Connect the unit to a suitable power source using the power supply provided. After showing a
starting screen, it will enter the last used listening mode. When the unit is started for the first
time, the setup wizard will be launched automatically.
MAIN MENU (SOURCE SELECTION)
By Pressing “SOURCE” button on the remote control or the “ ” on the unit, you can choose
between following Modes:
DAB, FM, Bluetooth®, CD, TV (DVB-T2, DVB-C, HDMI,USB)
BASIC OPERATIONS
Power ON/OFF
Press the “ ” knob on the unit or the “ ” button on the remote control to turn the unit on.
Press again the “ ” knob or the “ ” button on the remote control to turn the unit off.
Selecting modes
During on mode, press the “ ” button on the unit repeatedly to switch between the modes or
press the desired function on the remote control.
Adjusting the volume
Rotate the “
VOLUME
“ knob on the unit or press the “
V+/-
” button on the remote control to
decrease or increase the volume.
NOTE:
If you adjust the volume above 26, then power off and power on again, the volume will restore
to the factory setting automatically.
Mute
During playing mode, press the “ ” button on the remote control, the sound will not be heard
from the speaker.
Pres
s the “ ” button again, the “
V +/-
” button on the remote control or rotate the “
VOLUME
”
knob to cancel the mute function. The sound can be heard from the speakers again .