20V Cordless Brushless Paint Sprayer EN
12
Adjusting spray shape
-Horizontal pattern (‘up and down’
spraying motion)
- Vertical pattern(‘side to side’spraying
motion)
See Fig. E
Adjusting spray width
-Wide pattern (for spraying large
surfaces)
-Narrow pattern(For spraying smaller
areas, corners and edges)
See Fig.F
OPERATION
Checking the battery charge
condition
NOTE:
Fig. G1 only applies for the bat-
tery pack with battery indicator light.
See Fig.
G1
Charging the battery pack
See Fig.G2
Installing the battery pack
See Fig.G3
Press the trigger
USER TIPS
1. Position the tool six (6) to eight (8)
inches from the spray surface, depending
upon the spray pattern size desired
.Spray parallel to the surface with smooth
passes at a consistent speed.
2. Apply a thin layer of material on the first
pass and allow to dry before applying a
second, slightly heavier coat.
3. It is recommended to partially pull
trigger first in order to start the turbine
before a spray pass is made.
See Fig. H
****It is not necessary for most materials when used with
the nozzle of larger diameter. For use with the nozzle of
smaller diameter , thinning may be needed to acheive a
finer finish.If thinning is necessary, use the Viscosity cup
to adjust as you need(See Fig.A3).
7. NOZZLE AND PRESSURE SELECTION
See table for recommended spray pressure for your material.
Materials
Interior Stains/
Interior &
Exterior Clears
Exterior
Solid Stains
Primers
Enamels
Interior Latex
Paints
Exterior Latex
Paints
Speed control
1-5
6-10
6-10
6-10
6-10
6-10
Nozzles size
0.06’’(1.5 mm)
✓
✓
0.07’’(1.8 mm)
✓
✓
0.09’’(2.2 mm)
✓
✓
✓
0.1’’(2.6 mm)
✓
✓
✓
✓
Summary of Contents for WX020L
