12
WX840 WX840.X
20V Cordless 18 gauge Nail/
Staple Gun
LED worklight
NOTE:
The LED Worklights
provide feedback to indicate
whether the battery pack is
GLEVKIHWYƾGMIRXP]ERHSVMJXLI
tool is functioning properly.
See Fig. G
Removing a jammed nail
Try to operate the tool for two
QSVIXMQIWXSGSRƼVQXLIREMPMW
jammed.
WARNING:
Always
remove the battery pack
ƼVWX
•
Remove the nail and keep the
magazine open.
•
The nail jam can be freed by
MRWIVXMRKEƽEXFPEHIWGVI[HVMZIV
into the tip of the driving
mechanism and push it back.
•
Be sure the cover is closed and
the screws are tighten before
using the tool again.
See Fig. H1,
H2, H3
MAINTENANCE
Remove the battery pack from the tool before
carrying out any adjustment, servicing or
maintenance.
There are no user serviceable parts in your power
tool. Never use water or chemical cleaners to clean
your power tool. Wipe clean with a dry cloth. Always
store your power tool in a dry place. Keep the motor
ventilation slots clean. Keep all working controls free
of dust. Occasionally you may see sparks through
the ventilation slots. This is normal and will not
damage your power tool.
Positec Australia Pty Limited
10 Corporate Blvd Bayswater , VIC 3153, Australia
ENVIRONMENTAL
PROTECTION
Waste electrical products must not be
disposed of with household waste. Please
recycle where facilities exist. Check with your local
authorities or retailer for recycling advice.
