12
OPERATING INSTRUCTIONS
NOTE:
Before using the tool, read the instruction
book carefully.
INTENDED USE
The machine is intended for dry sanding of wood,
plastic, filler and coated surfaces.The sander is not to be
used for plastering.
ASSEMBLY AND OPERATION
ACTION
FIGURE
ASSEMBLY
* Fitting the Sanding Paper
See Fig. A
Attaching the Dust Box
CAUTION:
To prevent the
possibility of sanding dust or
foreign body being thrown into your
face or eyes, never attempt to use
your sander without the dust box
properly installed.
See Fig. B
Emptying the Dust Box
-For more efficient operation, empty
dusts box every 5-10mins.
See Fig. C1,
C2, C3
OPERATION
On/Off Switch
See Fig. D
Flush Sanding Facility
See Fig. E
* Installing The Finger Pad
See Fig. F1, F2
* Removing The Finger Pad
See Fig. G1, G2
* Attach Sanding Sheets And Pads
See Fig. H
Sanding With Finger Pad
See Fig. I
*
WARNING:
Failure to unplug the sander could
result in accidental starting causing possible
serious personal injury.
WORK HINTS FOR YOUR PALM SANDER
If your power tool becomes too hot, run no load for 2-3
minutes to cool the motor.
Always ensure the work-piece is firmly held or clamped to
prevent movement.
Any movement of the material may affect the quality of
the sanding finish.
Start your sander before sanding and turn off only after
stopping sanding. For best results sand wood in the
direction of the grit.
Do not start sanding without sandpaper fitted.
Do not allow the sandpaper to wear away, it will damage
the base-plate. The guarantee does not cover base-plate
wear and tear.
Use coarse grit paper to sand rough surfaces, medium grit
for smooth surfaces and fine grit for the final surfaces. If
necessary, first make a test on scrap material.
Use only good quality sandpaper.
The sanding efficiency is controlled by the sandpaper not
the amount of force you apply to the tool. Excessiveforce
will reduce the sanding efficiency and cause motor
overload. Replacing the sanding paper regularly will
Summary of Contents for D-TAIL WT649.1
