Worx HydroShot WG629, Manual

Cordless Portable Power Cleaner 

EN

14

ATTACHMENT OF 

ACCESSORIES

A number of accessories have been supplied with 

this product and are required for use in different 

applications. 

Do not attempt to use the cleaner 

with no lance or accessories attached.

1. Soap bottle (WG629.1 only)

Soap bottle provides detergent suds for deeper 

cleaning of dirt. It is used in conjunction with power 

nozzle or extension lance (WA4012). (See Fig. M1, 

M2)

2. Brush (WG629.1 only)

Brush is for cleaning cars, boats, motorcycles 

etc. It is used in conjunction with power nozzle or 

extension lance (WA4012). (See Fig. N1, N2)

3. Window squeegee with water sprayer 

(WG629.1 only)

The window squeegees quick connection easily 

snaps into the tool to spray water or wipe off 

water from glass or tiled surfaces. Suitable for the 

HYDROSHOT

TM

 power cleaner or extension lance 

(WA4012). (See Fig. O1, O2, O3, O4)

4. Bottle cap connector (WG629.1 WG629.2)

The bottle cap connector accessory allows the tool 

to directly connect with most 2 Liter bottles with 

approximately 1” openings. (NOTE: May not fit all 

consumable soda and water bottles) (See Fig. P1, 

P2, P3)

WARNING: Do not install the bottle cap 

connector accessory until it is ready to be 

used. The accessories vents will leak liquid, if 

a bottle is installed, with the machine lying on 

a surface.

5. Turbo nozzle (WA4037, sold separately)

The turbo nozzle delivers 360° of rotating water, 

which cleans a larger area than the 0° water 

pattern during the same time period. Suitable 

with the pressure cleaning lance installed on the 

HYDROSHOT

TM

. Recommend to use it with high 

pressure setting. (See Fig. Q)

MAINTENANCE

Remove the Battery Pack from the tool before 

carrying out any adjustment, servicing or 

maintenance.

Inspect the product for damaged or worn parts 

before each use. Do not operate it if you find 

damaged or worn parts. Contact your supplier or the 

manufacturer for replacement parts.

Hose filter maintenance

Remove the hose filter from the hose and get out 

the strainer. Rinse the parts with clean water before 

reassembling. (See Fig. R1, R2) 

Filter screen maintenance

Remove the hose adapter to get the filter screen. 

(See Fig. S1, S2) Rinse it with clean water before 

reassembling.

NOTE:

 When retightening the hose adapter, please 

tighten securely. Otherwise, it may not draw any 

water for proper operation.

WARNING: Any other servicing should be 

performed by an authorized service 

representative.

CLEANING/STORAGE

Before storage, completely drain all the water from 

the machine and hose.

Clean the moulded plastic housing of the machine 

using a soft brush and clean cloth. Do not use water, 

solvents or polishes. Store in a secure and dry place 

out of the reach of children. Do not place other 

objects on the product.

Store the machine and the accessories in a frost free 

place.