Worx Hydroshot WG629E, Original Instructions Manual

EN

2 in 1: Portable Power 

Cleaner/Water Sprayer

16

Watering

See Fig. M

ATTACHMENT OF 

ACCESSORIES

A number of accessories have been supplied with 

this product and are required for use in different

applications. 

Do not attempt to use cleaning 

without a lance or any accessories attached.

1. Soap bottle (WG629E.1 WG629E.91 only)

Soap bottle provides detergent suds for deeper 

cleaning of dirt. It is used in conjunction with power 

nozzle or extension lance. (See Fig. N1, N2)

2. Brush (WG629E.1 WG629E.91 only)

Brush is for cleaning cars, boats, motorcycles 

etc. It is used in conjunction with power nozzle or 

extension lance. (See Fig. O1, O2)

3. Foldable water bucket (WG629E.1 

WG629E.91 only)

Foldable water bucket allows you to connect to water 

supply when you are far away from a water source. 

When not in use, it can be folded for storage. (See 

Fig. P1, P2)

4. Turbo nozzle (WA4037, not included in 

WG629E models)

The turbo nozzle delivers 360° of rotating water, 

which cleans a larger area than the 0° water pattern 

during the same time period. Recommend to use it 

with high pressure setting (See Fig. Q)

5. Window squeegee with water sprayer 

(WA4050, not included in WG629E models)

The window squeegees quick connection easily 

snaps into the tool to spray water or wipe off 

water from glass or tiled surfaces. Suitable for the 

HydroShot power cleaner or the extension lance. 

(See Fig. R1, R2, R3, R4)

6. Bottle cap connector (WA4038, not 

included in WG629E models)

The bottle cap connector accessory allows the tool 

to directly connect with most 2 Liter bottles with 

approximately 1” openings. (NOTE: May not fit all 

consumable soda and water bottles) (See Fig. S1, 

S2, S3)

WARNING: 

Do not install the bottle cap 

connector accessory until it is ready to be used. 

The accessories vents will leak liquid, if a bottle is 

installed, with the machine lying on a surface.

MAINTENANCE

Remove the Battery Pack from the tool before 

carrying out any adjustment, servicing or 

maintenance.

Inspect the product for damaged or worn parts 

before each use. Do not operate it if you find 

damaged or worn parts. Contact your supplier or the 

manufacturer for replacement parts.

Hose filter maintenance

Remove the hose filter from the hose and get out 

the strainer. Rinse the parts with clean water before 

reassembling.(See  Fig. T1,T2)

CLEANING/STORAGE

Before Storage, completely drain all the water from 

the machine and hose.

Clean the moulded plastic housing of the machine 

using a soft brush and clean cloth. Do not use water, 

solvents or polishes. Store in a secure and dry place 

out of the reach of children. Do not place other 

objects on the product.

Store the machine and the accessories in a frost free place.

ENVIRONMENTAL 

PROTECTION 

Waste electrical products must not be disposed 

of with household waste. Please recycle where 

facilities exist. Check with your local authorities 

or retailer for recycling advice.