Lawn Mowing Robot
EN
10
3.2 How does my Landroid
®
L know where to go?
Your Landroid
®
L is capable of doing things on its own. The Landroid
®
L
knows when it needs to go to its Charging Base (3) to charge, can
sense when it is raining, can stop itself if it senses a problem, and
knows to stop, draw back, and then turn around when it bumps into
something blocking its path, such as a person, pet, or other object.
The Landroid
®
L will also automatically stop its Blade Turning Disc (16)
from rotating if it is lifted off the ground to prevent an accident.
A. Finding the charging base
When your Landroid
®
L needs to recharge, it will stop mowing and
follow the Boundary Wire (23) in an anti-clockwise motion back to its
Charging Base. Landroid
®
L will automatically stop rotating its Blade
Turning Disc when returning to its Charging Base. However , if it is
required to go back the Charge Base manually ( when you press the
home button), the Blade Turning Disc will rotate and cut the grass
near the boundary wire.
So if you want to mow the grass near
the boundary wire, just press the home button. We suggest
you use this function when the battery power is more than
75%. You can check the battery power in the display.
B. Rain sensors
The Landroid
®
L is fitted with a Rain Sensor (12) at its rear that will
detect rain drops and tell the Landroid
®
L to stop mowing and follow
the Boundary Wire back to its Charging Base (See Fig. B).
The Landroid
®
L is programmable to have a delay start function (0 –
180 mins) when it rains. When the rain sensors are wet, the Landroid
®
L
returns to its docking station. Only when the rain sensors become
dry will the Landroid
®
L begin the delay start countdown or return to
mowing immediately. If you want to command your Landroid
®
L to go
ahead and start mowing again before the time you have set under
the “Rain start delay” function, then press the Access Button (8),
dry the Landroid
®
L off, and close the Keypad Window (9) to tell it to mow again (See Fig. D, E). See the Programming and
Troubleshooting Guide for more details.
C. Sensing the boundary wire
The Landroid
®
L always obeys the border set by the Boundary Wire and uses two sensors at its front to sense when it is
getting close. (See Fig. C) Before changing direction, the Landroid
®
L will overrun the Boundary Wire around 25cm*.
*This is the recommended distance, because the Landroid
®
L cannot calculate the distance itself. Use the provided distance
gauge to ensure proper installation.
D. Starting and stopping while mowing
If you would like to command the Landroid
®
L to stop mowing, then simply press the Access Button (8) on top of the
mower. When pressed, the Landroid
®
L will open its Keypad Window and await your further commands. It will not begin
mowing again until you have closed its Keypad Window (See Fig. D, E).
E
D
B
C
Summary of Contents for LANDROID WG792E
Page 1: ...WG792E P02 P18 Lawn Mowing Robot Roboter Rasenm her EN D...
Page 34: ......
Page 35: ......
Page 36: ...Copyright 2013 Positec All Rights Reserved 2CLM80APK11001A2...
