Worx LANDROID WG792E, Original Instructions Manual

Lawn Mowing Robot 

EN

14

B. Replace the Blades

After some time, usually every season, your Landroid

®

L’s Blades will 

need to be replaced.  Your Landroid

®

L does not like mowing while 

using Blades of different age and quality.  So when replacing the 
Blades, make sure to replace all of them at the same time.  You can 
replace them with one of the three spare Blade kits and extra Blade 
screws supplied with your Landroid

®

L.

Before attempting to replace your Landroid

®

L’s Blades, turn the 

power off and put on protective gloves.  Then follow these steps:
1.   Gently flip the Landroid

®

L over.

2.  Take the screws off the Blades with a straight or Phillips screwdriver.
3.   Firmly screw on the new Blades. (See Fig. K)

IMPORTANT: 

After screwing the Blade to the Blade Disc, make 

sure the Blade is able to spin freely.

5.2   Keep it Clean

WARNING! Before cleaning turn your Landroid

®

L 

OFF by pressing the ON/OFF Button to OFF.  Put on 

protective gloves before cleaning the Blade Disc (16) and 

do not use running water. (See Fig. L,M,N)

A. Cleaning the Body

Your Landroid

®

L will live a much happier and longer life if it is cleaned 

regularly. Although, as your Landroid

®

L is an electric machine, you 

will need to take care when cleaning, so 

DO NOT

 use a hose, 

high pressure washers or otherwise pour running water on your 
Landroid

®

L, it is best to use a spray bottle filled with water.  When 

cleaning the machine body use a soft brush or clean cloth and avoid 
using solvents or polishes. (See Fig.O) Lastly, make sure that you 
remove all build up of grass clippings and debris.

B. Cleaning the Underside

Again, it is important that you power the Landroid

®

L OFF using the 

ON/Off Button and wear protective gloves before touching the Blade 
Disc (16).  
First, flip your Landroid

®

L upside down to expose its underside. Here 

you will see the Blade Disc (a), the surrounding Motor Frame Box 
(b) (14), and the Front (18) and Drive (11) Wheels.  Clean everything 
thoroughly with a soft brush or moist rag. (See Fig.P)
Rotate the Blade Disc to make sure it moves freely and that there 
is not anything lodged between it and the surrounding Motor Frame 
Box. Also, make sure the Blades are able to spin freely and that 
there's no grass obstructing them.

IMPORTANT: Remove any lodged debris so that it does 

not cause a crack in the Blade Disc. Even the tiniest 

crack can decrease your Landroid

®

L's mowing output.

O

N

L

M

K