Worx Landroid WR130E, Installation Manual

15

EN

Press 

 then 

 to send Landroid

®

 back to the charging base. 

Landroid

®

 will follow the boundary wire to the charging base. 

Fine tune the outline shape of the boundary wire if necessary.

NOTE:

If the boundary wire is broken during the testing or you need to extend the boundary wire, please refer to “

Joining the 

Boundary Wire

” in Owner’s Manual for instructions. 

Check the status of the LED light indicator on the charging base to make sure the connection is OK.
If the verification test is completed smoothly, you can start mowing by pressing 

 then 

 .

If there is any problem during verification test, please refer to “Owner’s manual-Troubleshooting”. 

4

5

LED light indicator on the 
charging base

Status

Action

Light does not turn on

There is no power.

Confirm that the power cord is connected properly to the 

charger and that the charger is connected to a suitable 

power supply.

Green light on

Boundary wire is connected 

successfully; Landroid

®

 is fully 

charged.

/

Red light on

The Boundary Wire isn’t connected.

Confirm that there are no breaks in the boundary wire.

Power supply is connected 

successfully, while the wire is 

connected unsuccessfully.

Check that the boundary wire has been connected 

correctly to the charging base. 

Confirm that there are no breaks in the boundary wire.

Green light flashing

Landroid

®

 is auto charging.

/

• 

If your  Landroid

®

 is 

outside its territory, it will 
not move and “

“ 

will be displayed. 
Move it inside its territory 
and repeat Verification.

• 

If your  Landroid

®

 is 

inside its territory but 
“

“ is displayed, 

please refer to “

Error 

Messages

” in Owner’s 

Manual for solutions.

• 

Your  Landroid

®

 should 

always remain switched 
on. If you ever need to 
turn it off, then make 
sure you place it within 
its boundary area 
before you switching it 
back on again.

• 

Should your  Landroid

®

stop operating, simply 
restart it and operate it 
as you normally would.

NOTE: Please refer to the Owner’s Manual for more information.

Warning

Only for reference