Worx Landroid WR130E, Installation Manual

7

EN

26c

m

26cm

26c

m

35% (20°)

The slope would be:
35cm (Elevation)
100cm (Length)    

=35% (slope)

Placement of boundary wire on slopes

The upper boundary wire should NOT be placed on slopes 
steeper than 35% (20°), and it should be placed at a distance of 
26cm from any obstacle. The lower boundary wire should NOT 
be placed on slopes steeper than 17% (10°), and it should be 
placed at least 40cm away from any obstacle when positioned 
on a slope that is 17%. 

NOTE: 

The lower boundary wire cannot be laid across a slope 

steeper than 17% as Landroid

®

 will slip and cross outside the 

wire, especially when the grass is wet. 

Placement of boundary wire at a corner

If you want Landroid

®

 to turn a right angle, lay down the 

boundary wire as the illustration shown.

Upper boundary wire

Lower boundary

 Wire

Lower boundary

 Wire

**How to calculate the slope of your lawn:

100cm

35cm

Length

Elev

ation

Max. 35% slope

Max.10cm

Max.2.5cm

Max.2cm

Depressions and bumps

In case of large bumps (higher than 2cm) or dips (wider than 
10cm and deeper than 2.5cm), please determine if the blades 
would touch the ground or if Landroid

®

 would get stuck. If 

this is the case, either make the inclines smoother or exclude 
these areas from Landroid

®

’s operation.

Slopes

Your Landroid

®

 has the ability to safely climb slopes up to 

35% (20°)**, so please avoid areas steeper than this.