Quick reference
EN
29
ERROR MESSAGES
Sometimes things can go wrong. Fortunately Landroid is smart enough to tell you if it is enountering an issue, so you can fix it. If in doubt,
please visit our website where you will find useful videos and further support.
MESSAGE
CAUSE
ACTION
EE
Error unknown.
Please contact Customer Services.
F1
Rain delay.
Your Landroid will start after the rain
stops and the rain delay has expired.
E1
Boundary wire missing OR Landroid
outside wire.
1. If Landroid is actually outside its
working area: turn power off, take
Landroid inside its working area. Turn
power on. Press start.
2. If the Landroid is inside its working
area, check if the LED on the charging
base is green. If not, verify that the
charging base is properly connected to
the charger and that the charger is
connected to a suitable power supply. If
they are properly connected, the
boundary wires are clamped incorrectly
and must be reversed.
3. Reverse the boundary wire ends.
E2
Motor wheels fault.
Turn power off and take Landroid to an
area free from obstacles.
Turn power on. Press start.
If the error message is still displayed,
turn power off. Turn Landroid
upside-down and check if there’s
anything preventing the wheels from
rotating.
Remove any obstruction, turn Landroid
upright, turn power on.
E3
Motor blade fault.
Turn power off.
Turn Landroid upside down, put on
safety gloves to prevent injury and
check if there’s anything preventing the
blade disc to rotate.
Remove any obstruction.
Turn Landroid upright and take it to
an area with short grass or adjust the
cutting height;
Turn power on. Press start.
Summary of Contents for Landroid WR139E
Page 1: ...Owner s manual WR139E...
