background image

Safety first

EN

4

IMPORTANT SAFETY INSTRUCTIONS. 
KEEP FOR FUTURE REFERENCE.

           

Attention:

 read all safety warnings and all instructions for the safe operation of the machine. Failure to follow the warnings and 

instructions may result in electric shock, fire and/or serious injury.

•  Landroid is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of 
  experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person 
  responsible for their safety
•  Children should be supervised to ensure that they do not play with Landroid
•  Landroid is only to be used with the power supply unit provided with it

Safety guidance before use

•  Read the instructions carefully. Make sure you understand the instructions and be familiar with the controls and the proper 
  use of Landroid
•  Never allow people unfamiliar with these instructions or children to use Landroid
•  The operator or user is responsible for accidents or hazards occurring to other people or their property

Preparation before use

•  Ensure the correct installation of boundary wire as instructed
•  Periodically inspect the area where Landroid is to be used and remove all stones, sticks, wires, bones, and other foreign objects
•  Periodically visually inspect to see that the blades, blade bolts and cutter assembly are not worn or damaged. Replace worn or 
  damaged blades and bolts in sets
•  Turn off Landroid, remove the battery, wear protectives gloves and take care when inspecting blades, as rotating one blade can cause  
  other blades to rotate

WARNING!

 The lawnmower should not be operated without the guard in place

Safe Operation

•  Never operate the appliance with defective guards or without the guard in place
•  Do not put hands or feet near rotating parts 
•  Never pick up or carry Landroid while it is running
•  Turn off the machine and remove the battery before clearing a blockage and before checking, cleaning or working on Landroid
•  It is not permitted to modify the original design of Landroid. All modifications are made at your own risk
•  Start Landroid according to the instructions. When the power key is switched on, make sure you keep your hands and feet away from  
  the rotating blades.
•  Never lift up Landroid or carry it when the power is switched on
•  Do not put anything on top of Landroid or its charging station
•  Do not allow Landroid to be used with a defective blade disc or body. Neither should it be used with defective blades, screws, 
  nuts or cables
• Switch off Landroid when you do not intend to use it for a long period of time
•  Landroid can only start when the power is switched on and the correct PIN code has been entered
•  Avoid using Landroid in bad weather conditions especially when there is a risk of lightning
•  Do not touch moving hazardous parts before these have come to a complete stop
•  Do not leave Landroid to operate unattended if you know that there are pets, children or people in the vicinity

Summary of Contents for Landroid WR139E





































Reviews: