Worx Nitro WG748E Original Instruction Download

Page: 14 / 192

Cordless Lawn Mower

Assembling the handle bar &
Adjusting Handle’s height

NOTE:

Press and hold

Quick-release button during
operation.

See Fig. A1, A2

Assembling the grass
collection bag

See Fig. B

Assembling the grass
collection bag to the lawn
mower

NOTE:

Depress the grass

collection bag slightly to
ensure that it is completely
installed.

NOTE:

Take the mulching insert

out of the lawn mower before
fitting the grass collection bag.

See Fig. C1, C2, C3

Removing/emptying grass
collection bag

WARNING!

Always check

the safety flap close the

discharge outlet before using.
Never lift the safety flap when
the lawn mower is being used
without fitted grass collection
bag.

See Fig. D1,D2

Installing mulching insert

See Fig. E

Removing /fitting the battery
pack
Insert the safety key before
installing the battery pack.

NOTE:

This machine will only

run when sp - batteries are
installed. It is recommended to
use the same AH batteries and
charge the two batteries at the
same time.
When you use two batteries
with different AH, the machine
will only run to the lower
common denominator.

See Fig. F1, F2

Checking the battery charge
condition

NOTE:

Fig. G1 only applies for

the battery pack with battery
indicator light.

See Fig.G1

Charging the battery pack

NOTE:

The batteries are

shipped uncharged. Each
battery must be fully charged
before the first mow.
Always fully charge the two
batteries at same time.
More details can be found in
charger’s manual

See Fig.G2

OPERATION

Power indicator light
See details in BATTERY STATUS
part

IMPORTANT:
When only one light is
illuminated, your battery
is overly discharged, even
though the machine may
still be capable to work.
Continuing to operate
your machine with the
battery in this discharged
condition may reduce the
life and performance of your
battery.
When no light is illuminated,
at least one battery is not
fully installed or battery
may be defective, please
double check the batteries
are fully seated into
position.

See Fig.H

Starting and Stopping

See Fig.I1,I2

Adjusting the cutting height

WARNING!

Stop, release

Operating Bail and wait

until the motor stops before
adjusting height. The blades
continue to rotate after the
machine is switched off, a
rotating blade can cause injury.
Do not touch rotating blades.

See Fig. J

Storage

See Fig. ,K1,K2

BATTERY STATUS (See Fig. H)

•

Before starting or after use, press the button beside
the power indicator light on the machine to check the
battery capacity.

•

During operation, the battery capacity will be indicated
automatically by the battery power indicator. The
indicator constantly senses and displays the battery
condition as follows.

•

Charge the machine with 2 battery packs with different
AH ,the power indicator light displays the battery
condition with the lower one of the two batteries.

Battery indicator

light status

Battery condition

Five green lights
(

) are

illuminated.

The two batteries are in a highly
charged condition.

Two, three or four
green lights are
illuminated.

The two batteries have a remain-
ing charge. The more lights are
illuminated, the more battery
capacity.