11
10
2 in 1 Grass Trimmer/Edger
EN
11
10
the date of purchase.
We guarantee to repair or replace all defective
parts free of charge, repair products subject
to fair wear and tear, free of charge, or at our
discretion, replace the unit free of charge
to ensure minimum inconvenience to the
customer. Your warranty is subject to the
following conditions:
• Proof of purchase date and a valid receipt is
produced.
• The product has not been misused.
• The product has not been used for
Professional purposes.
• Unauthorized persons have not attempted
repairs.
• The product has not been used for hire
purposes.
• The product has not sustained damage
through foreign objects, substances or
accidents.
• Damage is not a result of fitting non-
approved accessories.
To claim the guarantee, you will need to
submit proof of purchase to the seller or an
authorized repair agent. You can check the
location of your nearest authorized repair
agent by contacting us at:
Positec USA, Inc.
Charlotte, NC 28216
PHONE: 1-866-354-WORX (9679)
This warranty does not apply to accessories.
This warranty applies only to the original
purchaser and may not be transferred.
All repairs and replacement tools will be
covered by the limited warranty for the
balance of the warranty period from the date
of the original purchase.
All repairs must use genuine spare parts.
WARNING!
Your Trimmer is designed to
only use line with a maximum diameter
of 0.065”. Only use nylon line.
IMPORTANT
- Always wind the line onto the
upper section of the spool first.
TO MANUALLY WIND LINE
Take approximately 16ft line and insert 5/8” of
line into one of the holes in the upper section
of the spool. Wind the line in the direction
of the arrows on the top of the spool. Leave
approximately 4” of line unwound and place it
into the cleat. Repeat on the lower section of
spool. Care should be taken to ensure that the
line is neatly coiled on the spool. Failure to do
so will impair the efficiency of the automatic
line feed. Then fit the spool as described above
in
“Changing the Line Spool”
.
MAINTENANCE
After use, disconnect the machine from the
power supply and check for damage.
Your power tool requires no additional
lubrication or maintenance.
There are no user serviceable parts in your
power tool.
Electric trimmers should only be repaired by
an authorised repairer.
Use only manufacturers recommended
replacement parts and accessories.
Never use water or chemical cleaners to clean
your power tool. Wipe clean with a dry cloth.
Always store your power tool in a dry place
out of the reach of children.
Keep the motor ventilation slots clean. Keep all
working controls free of dust.
If you see some sparks flashing in the
ventilation slots, this is normal and will not
damage your power tool.
WARRANTY STATEMENT
30 DAY Satisfaction Guarantee
If your WORX product becomes defective due
to faulty materials or workmanship within the
specified warranty period of;
• 24 months for DIY and light trade use, from
11
10
