background image

4

3 in 1 Grass Trimmer/Edger

WG160E.5 

SAVE THESE 

INSTRUCTIONS

Additional safety requirements for your 

lawn trimmer

This grass trimmer is designed for cutting This 
grass trimmer is designed for cutting grass 
and similar soft vegetation and for trimming 
grass edges in private and hobby garden areas 
which are not accessible with a lawnmower.   
The device is not allowed to be used in public 
gardens, parks, sports centres or at roadsides 
as well as in agriculture and forestry.
This lawn trimmer is not allowed to be used 
for cutting or chopping: 
- hedges, shrubs and bushes, 
- Flowers, 
- In terms of composting. 
Otherwise, there is a risk of injury.

This appliance is not intended for use by 
persons (including children) with reduced 
physical, sensory or mental capabilities, or 
lack of experience and knowledge, unless they 
have been given supervision or instruction 
concerning use of the appliance by a person 
responsible for their safety. 
Children should be supervised to ensure that 
they do not play with the appliance.
If the supply cord is damaged, it must be 
replaced by the manufacturer, its service agent 
or similarly qualified persons in order to avoid 
a hazard.

1.  Read the instructions carefully. Be familiar 

with the controls and proper use of the 
equipment.

2.  Wear eye protection.
3.  Never allow children or people unfamiliar 

with these instructions to use the trimmer.

4.  Avoid using the trimmer, while people, 

especially children or pets, are nearby.

5.  Use the trimmer only in daylight or good 

artificial light. 

6.  Never operate the trimmer with damaged 

guards or shields or without guards or 
shields in place.

7.  Switch on the motor only when the hands 

and feet are away from the cutting means.

8.  Never fit metal cutting elements.

9.  Use only the manufacturer’s recommended 

replacement parts and accessories.

10. Disconnect the battery from the trimmer 

before carrying out maintenance or 
cleaning work.

11. Inspect and maintain the trimmer regularly. 

have the trimmer repaired only by an 
authorized repairer.

12. Take care against injury from the blade(s) 

fitted for trimming the filament line length. 
After extending new cutter line, always 
return the trimmer to its normal operating 
position before switching on.

13. Always ensure that the ventilation openings 

are kept clear of debris.

14. When not in use, store the trimmer out of 

the reach of children.

15. Wear protective glasses or goggles;
16. Before using the machine and after any 

impact, check for signs of wear or damage 
and repair as necessary;

17. Under abusive conditions, liquid may be 

ejected from the battery; avoid contact. 
If contact accidentally occurs, flush with 
water. If liquid contacts eyes, additionally 
seek medical help. Liquid ejected from the 
battery may cause irritation or burns.

 

MAINTeNANce

1)  When not in use store the machine out of 

the reach of children;

2)  After use, disconnect the battery from the 

machine and check for damage;

3)  Use only manufacturers recommended 

replacement parts and accessories. 

4)  have your power tool serviced by a 

qualified repair person using only identical 
replacement parts. This will ensure that the 
safety of the power tool is maintained;

WARNINGS:

-  Read the instructions carefully,
-  Be familiar with the controls and proper use 

of the equipment;

-  Warning. Cutting elements continue to 

rotate after the motor is switched off,

Summary of Contents for WG160E.5

















Reviews: