Attachment-Capable String Trimmer EN
9
If damaged, have the power tool repaired
before use.
Many accidents are caused by poorly
maintained power tools.
f) Keep cutting tools sharp and clean.
Properly
maintained cutting tools with sharp cutting edges
are less likely to bind and are easier to control.
g) Use the power tool, accessories and tool bits
etc. in accordance with these instructions,
taking into account the working conditions
and the work to be performed.
Use of the
power tool for operations different from those
intended could result in a hazardous situation.
h) Keep handles and grasping surfaces dry,
clean and free from oil and grease.
Slippery
handles and grasping surfaces do not allow for
safe handling and control of the tool in unexpected
situations.
5) Battery tool use and care
a) Recharge only with the charger specified by
the manufacturer.
A charger that is suitable for
one type of battery pack may create a risk of fire
when used with another battery pack.
b) Use power tools only with specifically
designated battery packs.
Use of any other
battery packs may create a risk of injury and fire.
c) When battery pack is not in use, keep it away
from other metal objects, like paper clips,
coins, keys, nails, screws or other small
metal objects, that can make a connection
from one terminal to another.
Shorting the
battery terminals together may cause burns or a
fire.
d) Under abusive conditions, liquid may be
ejected from the battery; avoid contact. If
contact accidentally occurs, flush with water.
If liquid contacts eyes, additionally seek
medical help.
Liquid ejected from the battery may
cause irritation or burns.
e) Do not use a battery pack or tool that is
damaged or modified.
Damaged or modified
batteries may exhibit unpredictable behaviour
resulting in fire, explosion or risk of injury.
f) Do not expose a battery pack or tool to fire
or excessive temperature.
Exposure to fire or
temperature above 130 °C may cause explosion.
g) Follow all charging instructions and
do not charge the battery pack or tool
outside the temperature range specified
in the instructions.
Charging improperly or at
temperatures outside the specified range may
damage the battery and increase the risk of fire.
6) Service
a) Have your power tool serviced by a
qualified repair person using only identical
replacement parts.
This will ensure that the safety
of the power tool is maintained.
b) Never service damaged battery packs.
Service
of battery packs should only be performed by the
manufacturer or authorized service providers.
BRUSH CUTTER SAFETY
WARNINGS
1. Do not use the machine when the operator is tired,
ill or under the influence of alcohol or other drugs.
2. Keep a firm footing and balance during operating.
Use the harness provided.
3. Replace cutting blade if cracked, chipped, or
damaged in any way. Be sure the blade is properly
installed and securely fastened. Failure to do so can
cause serious injury.
4. Keep away from cutting blade. Even after the motor
has stopped, the cutting blade will continue to
rotate for several seconds. Please wait until cutting
blade has fully stopped before putting the machine
down or accessing the cutting area.
5. Switch off the machine when not cutting. Never
leave the machine running when unattended.
GENERAL SAFETY WARNINGS
WARNING Read all safety warnings
and all instructions.
Failure to follow the
warnings and instructions may result in electric shock,
fire and/or serious injury.
Save all warnings and instructions for future
reference.
The appliance is only to be used with the power supply
unit provided with the appliance.
IMPORTANT
READ CAREFULLY BEFORE USE
KEEP FOR FUTURE REFERENCE
Safe operating practices
1. Training
a) Read the instructions carefully. Be familiar with the
controls and the correct use of the machine.
b) Never allow children, persons with reduced physical,
sensory or mental capabilities or lack of experience
and knowledge or people unfamiliar with these
instructions to use the machine, local regulations
may restrict the age of the operator.
c) Keep in mind that the operator or user is responsible
for accidents or hazards occurring to other people
or their property.
2. Preparation
a) Before use, always visually inspect the machine for
damaged, missing or misplaced guards or shields.
b) Never operate the machine while people, especially
children, or pets are nearby.
3. Operation
a) Wear eye protection, long trousers and stout shoes
at all times while operating the machine.
b) Avoid using the machine in bad weather conditions
especially when there is a risk of lightning.
c) Use the machine only in daylight or good artificial
light.
d) Never operate the machine with damaged guards
Summary of Contents for WG186E
