12A 3 in 1 Blower/Vac/Mulcher
EN
11
10
OPERATION
INTENDED USE:
The blower & Vac is intended for residential
use only. Use the blower outdoors to move or
vacuum yard debris as needed.
Assembly and Operation
ACTION
FIGURE
Blow mode
Assembling the Blower Tube
See Fig. A
Attaching the Extension Cord See Fig. B1&B2
Starting & Stopping
See Fig. C
Using the Blower
See Fig. D
Adjusting the Blowing Speed
See Fig. E
Vacuum mode
Disassembling the Blower
See Fig. F
Assembling the Vacuum Tube
See Fig.
G1&G2&G3
Attaching the Leaf Collection
Bag
See Fig. H
Attaching the Extension Cord See Fig. B1&B2
Starting & Stopping
See Fig. C
Using the Vacuum
See Fig.I
Emptying the Leaf Collection
Bag
See Fig. J1&J2
Removing Clogged Debris
from the Impeller (no tool
included)
See Fig. K1&K2
MAINTENANCE
Remove the plug before carrying out any
adjustment, servicing or maintenance.
Never use water or chemical cleaners to
clean your power tool. Wipe clean with a dry
cloth. Keep the motor ventilation slots clean.
Keep all working controls free of dust. If the
replacement of the supply cord is necessary,
this has to be done by the manufacturer or his
agent in order to avoid a safety hazard.
STORAGE
Store the Blower/Vacuum and extension cord
indoors, in a cool dry location, out of reach of
children and animals.
TROUBLE SHOOTING
Problems
Possible
Causes
Corrective
Action
The
Blower/Vac
does not
operate.
The Vacuum
Tube or the
Fan Cover is
not attached
to the Motor
Housing.
Attach the
Vacuum
Tube or the
Fan Cover
to the Motor
Housing.
Power cord is
not connected
to the power
source.
Connect the
power cord
to a power
source.
The
Blower/Vac
jammed or
clogged.
Debris
blocking in the
Impeller
Remove
clogged
debris from
the Impeller.
Debris
blocking in
the Vacuum
Tube or the
connection
of the Leaf
Collection Bag
Remove
clogged
debris from
the Vacuum
Tube or the
connection
of the Leaf
Collection
Bag
