background image

9

Cordless Li-Ion Blower/Sweeper

WG546E WG546E.1 WG546E.2 WG546E.9

k) After extended periods 

of storage, it may be 

necessary to charge and 

discharge the battery pack 

several times to obtain 

maximum performance.

l)  Battery pack gives its best 

performance when it is 

operated at normal room 

temperature (20°C ± 5°C).

m)When disposing of battery 

packs, keep battery packs 

of different electrochemical 

systems separate from 

each other.

n) Recharge only with the 

charger specified by 

WORX. Do not use any 

charger other than that 

specifically provided for 

use with the equipment. 

charger that is suitable for one 

type of battery pack may create 

a risk of fire when used with 

another battery pack. 

o) Do not use any battery 

pack which is not designed 

for use with the equipment.

p) Keep battery pack out of 

the reach of children.

q) Retain the original product 

literature for future 

reference.

r) Remove the battery from 

the equipment when not in 

use.

s) Dispose of properly.

SYMBOLS

Read the operator’s manual

Wear eye protection

Wear ear protection

Keep bystanders away

Warning of hazard

Do not use in the rain or leave 

outdoors while it is raining.

Make sure the battery is 

removed prior to changing 

accessories.

Li-Ion battery. This product has 

been marked with a symbol 

relating to ‘separate collection’ 

for all battery packs and battery 

pack. It will then be recycled or 

dismantled in order to reduce 

the impact on the environment. 

Battery packs can be hazardous 

for the environment and for 

human health since they contain 

hazardous substances.

Summary of Contents for WG546E













Reviews: