10
Cordless Li-ion Blower/
Sweeper
WG549E WG549E.5
WG549E.9
battery pack from your tool. After recharging, insert
the battery pack into tool’s battery port. A simple push
and slight pressure will be sufficient.
4. StARtING/StoPPING (See fig. D)
StARtING
Move the On/Off switch (2) to the “i” On position.
StoPPING
Move the On/Off switch to the “O” Off position.
WARNING!
The tool runs for a few seconds
after it has been switched off. Let the motor
come to a complete standstill before setting the tool
down.
5. USING tHe BloWeR (See fig. e)
The blower is intended for residential use only.
Use the blower outdoors to move debris from hard
surfaces. This blower is not designed to clear leaves
from large grassy areas, or move wet, heavy debris.
USeR tIPS
- Hold the blow tube approx 180mm above the
ground when operating the tool.
Use a sweeping motion from side to side. Advance
slowly keeping the accumulated debris/leaves in
front of you.
- After blowing the debris/leaves into a pile, it is
easy to dispose of the pile.
cAUtIoN!
_ Do not blow hard objects such as nails, bolts, or rocks.
_ Do not operate the blower near bystanders or pets.
_ Use extra care when cleaning debris from stairs or
other tight areas.
_ Wear safety goggles or other suitable eye
protection, long pants, and shoes.
CLEANiNG THE TOOL
Clean the tool regularly.
WARNING! keep your product dry. Under
no circumstances spray with water.
- to clean the tool, use only mild soap and a
damp cloth.
- Do not use any type of detergent, cleaner or
solvent which may contain chemicals that
could seriously damage the plastic.
- Self lubricating bearings are used in your
product, therefore lubrication is not required.
6
C
D
E
A
B
