13
12
Electric Lawn Mower
WG717E
If cutting a second time, it is advisable to cut
perpendicular (across) the first cut pattern. DO
NOT CHANGE CUT PATTERN IN ANY WAY THAT
WOULD CAUSE MOWING DOWN A HILL.
5. Change your cutting pattern from week to week.
This will help prevent matting and graining of the
lawn.
MAINTENANCE
WARNING:
Stop the mower and unplug the
tool before performing any maintenance.
NOTE
: To ensure long and reliable service, perform
the following maintenance procedures regularly.
Check for obvious defects such as a loose, dislodged
or a damaged blade, loose fittings and hardware,
and worn or damaged components. Check that
the covers and guards are all undamaged and are
correctly attached to mower. Carry out any necessary
maintenance or repairs before operating mower. If
the mower should happen to fail despite regular
maintenance, please call our customer helpline for
advice.
BLADE (13) MAINTENANCE (See Fig. I1, I2)
WARNING!
Never carry out any assembly
operations or adjustments with the power
connected to the mower. Always ensure that the
power button is in the off position and that the power
plug is disconnected from the supply.
Always handle the blade with care-sharp edges could
cause injury use gloves.
Follow these procedures to remove and replace the
blade. You will need garden gloves (not provided) and
a spanner wrench to remove the blade. Hold the Blade
and unscrew the Blade Bolt (12) anticlockwise using a
spanner wrench. Remove Blade and attach a new one
to the blade bolt.
Ensure that the blade is properly positioned as seen
in Fig. I1, then firmly tighten the bolt. Do not over
tighten.
Renew your metal blade after 50hrs mowing or
2 years, whichever is the sooner-regardless of
condition.
If the blade is cracked or damaged replace it
with a new one.
13
12
I1
I2
