Worx WG719, Owner'S Manual

14

13AMP Electric Lawn Mower               EN

ASSEMBLY & OPERATION

ACTION 

FIGURE

ASSEMBLE

Assembling the handle bar

See Fig. A1

Adjustment Handle’s height

See Fig. A2

Assembling the grass 
collection bag

See Fig. B

Assembling the grass 
collection bag to the lawn 
mower

See Fig. C1 
C2 C3

Removing/emptying the 
grass collection bag

See Fig. C4

Installing side-discharge 
chute

See Fig. D1 D2

Installing mulching plug

See Fig. E1 E2

OPERATION

Starting 

See Fig. F1 F2

Stopping 

See Fig. F3

Adjusting The Cutting Height

NOTE:

 Pull the Cutting 

Height Adjustment Lever 
(8) to adjust the rear of the 
mower height only. Pull the 
Front Caster Wheel Height 
Adjustment Lever (6) to 
adjust the Front Wheel Height 
in the same time to adjust the 
same cutting height.

See Fig. G

Lock/Unlock Front Caster 
Wheel

NOTE: 

When the mower 

climb slopes, the Front Caster 
Wheel Control Button should 
be locked to keep straight.
But in the smooth garden, the 
Front Caster Wheel Control 
Button should be unlocked to 
keep maneuverability.

See Fig. H1 H2

STORAGE

See Fig. I1 I2

MULCHING MOWING TIPS

While mulching, your new mower is designed 
to cut the grass clippings into small pieces 
and distribute them back into the lawn. Under 
normal conditions, the mulched grasses will 
biodegrade quickly to provide nutrients to the 
lawn.
Please review the following recommendations 
for optimum mulching performance.
1.  Avoid mowing when the grass is wet from 

rain or dew. Wet grass may form clumps 
which interfere with the mulching action 
and reduce runtime.  The best time to mow 
grass is in the late afternoon when the 
grass is dry and the newly cut area will not 
be exposed to direct sunlight.

2.  For best mulching performance, set 

the cutting height to remove about one 
third of the grass blade length, ideally 
no more than 1-1/2” at one time. If the 
lawn is overgrown, it may be necessary 
to increase the cut height to reduce the 
pushing effort and prevent overloading the 
motor. For extremely heavy mulching, it is 
advisable to first cut at a high cut height 
setting, and then re-cut to the final cut 
height. Otherwise, make narrower cuts and 
mow slowly. 

3.  For best performance, keep the mower 

housing free of built-up grass. From time 
to time turn off mower and wait for the 
blade to come to a complete stop. Using 
an object such as a stick, wipe out any 
accumulation of grass in the blade area. 
Be careful of the sharp edges of the blade. 
Clean often in wet, new grass, and always 
after every use.

4.  Certain types of grass or grass conditions 

may require that an area be mulched a 
second time to fully disperse the grass 
throughout the lawn.  If cutting a second 
time, it is advisable to cut perpendicular 
(across) the first cut pattern. DO NOT 
CHANGE CUT PATTERN IN ANY WAY THAT 
WOULD CAUSE MOWING DOWN A HILL.

5.  Change your cutting pattern from week to 

week. This will help prevent matting and 
graining of the lawn.

CAUTION:

 Do not attempt to unclog 

the blade chamber by dropping or