16
Cordless lawn mower
WG784E WG785E
new grass, and always after every use.
4) Certain types of grass or grass conditions may
require that an area be mulched a second time
to fully disperse the grass throughout the lawn.
If cutting a second time, it is advisable to cut
perpendicular (across) the first cut pattern. DO NOT
CHANGE CUT PATTERN IN ANY WAY THAT WOULD
CAUSE MOWING DOWN AHILL.
5) Change your cutting pattern from week to week. This
will help prevent matting and graining of the lawn.
MAINTENANCE
WARNING: Stop the mower and remove the
safety key before removing the grass bag.
NoTe:
To ensure long and reliable service, perform the
following maintenance procedures regularly. Check
for obvious defects such as a loose, dislodged or a
damaged blade, loose fittings, and worn or damaged
components. Check that the covers and guards are
all undamaged and are correctly attached to mower.
Carry out any necessary maintenance or repairs before
operating mower. If the mower should happen to fail
despite regular maintenance, please call our customer
helpline for advice.
BlAde ShARPeNING
keeP BlAde ShARP foR BeST MoWeR
PeRfoRMANCe. A dull BlAde doeS NoT CuT
GRASS CleANly oR MulCh PRoPeRly.
WeAR PRoPeR eye PRoTeCTIoN WhIle
ReMovING, ShARPeNING, ANd INSTAllING
BlAde. eNSuRe ThAT SAfeTy key IS ReMoved.
Sharpening the blade twice during a mowing
season is usually sufficient under normal
circumstances. Sand causes the blade to dull
quickly. If your lawn has sandy soil, more
frequent sharpening may be required.
RePlACe BeNT oR dAMAGed BlAde
IMMedIATely.
WheN ShARPeNING The BlAde:
1. Make sure blade remains balanced.
2. Sharpen blade at the original cutting angle.
3. Sharpen cutting edges on both ends of blade,
removing equal amounts of material from both
ends.
To ShARPeN BlAde IN A vISe (See N)
1. Be sure the switch lever is released, the blade
N-1
N-2
N-3
O-1
O-2
O-3
N
O
