background image

3

EN

PRODUCT SAFETY 

GENERAL & ADDITIONAL SAFETY INSTRUCTION

WARNING: Read all safety warnings and all instructions.

 Failure to follow the 

warnings and instructions may result in electric shock, fire and/or serious injury.

Carefully read the instructions for the safe operation of the machine.

Save all warnings and instructions for future reference.

-This appliance is not intended for use by persons (including children) with reduced physical, 

sensory or mental capabilities, or lack of experience and knowledge, unless they have been given 

supervision or instruction concerning use of the appliance by a person responsible for their safety.

-Children should be supervised to ensure that they do not play with the appliance.

-This appliance contains batteries that are only replaceable by skilled persons.

WARNING:

 For the purposes of recharging the battery, only use the detachable supply unit 

provided with this appliance.

WARNING: 

To reduce the risk of injury to persons and damage to the machine, do not remove 

battery pack before switching off the machine.

IMPORTANT

READ CAREFULLY BEFORE USE

KEEP FOR FUTURE REFERENCE

Safe operation practices

Training

a)  Read the instructions carefully. Make sure you understand the instructions and be familiar with 

the controls and the proper use of the appliance.

b)  Never allow people unfamiliar with these instructions or children to use the appliance. Local 

regulations can restrict the age of the operator.

c)  The operator or user is responsible for accidents or hazards occurring to other people or their 

property.

Preparation

a)  Ensure the correct installation of boundary wire as instructed.

b)  Periodically inspect the area where the appliance is to be used and remove all stones, sticks, 

wires, bones, and other foreign objects.

c)  Periodically visually inspect to see that the blades, blade bolts and cutter assembly are not worn 

or damaged. Replace worn or damaged blades and bolts in sets to preserve balance.

d)  On multi-spindle appliances, take care as rotating one blade can cause other blades to rotate.

e)  WARNING! The lawnmower shall not be operated without the guard in place.

Operation

1. General

a)  Never operate the appliance with defective guards, or without safety devices, for example 

deflectors, in place.

b)  Do not put hands or feet near or under rotating parts. Keep clear of the discharge opening at all 

times.

c)  Never pick up or carry an appliance while the motor is running.

d)  Operate the disabling device from the appliance.

-    Before clearing a blockage;

-    Before checking, cleaning or working on the appliance.

e)  It is not permitted to modify the original design of robotic lawnmower. All modifications are made 

at your own risk. 

f)   Start robotic lawnmower according to the instructions. When the power key is switched on, 

make sure you keep your hands and feet away from the rotating blades. Never put your hands 

Summary of Contents for WR149E

























Reviews: