background image

5

EN

    You select the four digit PIN code when you start the mower for the first time.

b)  Always switch off robotic lawnmower if you intend to carry the mower.

c)  Carry the mower by the handle at the rear under the mower. Carry the mower with the blade disc 

away from the body.

RF exposure requirements

To satisfy RF exposure requirements, a separation distance of 200mm or more should be 

maintained between this device and persons during device operation.

To ensure compliance, operations at closer than this distance is not recommended. The antenna 

used for this transmitter must not be co-located in conjunction with any other antenna or transmitter. 

Safety Warnings for battery pack

a) Do not dismantle, open or shred cells or battery pack. 

b) Do not short-circuit a battery pack. Do not store battery packs haphazardly in 

a box or drawer where they may short-circuit each other or be short-circuited 

by conductive materials. 

When battery pack is not in use, keep it away from other metal 

objects, like paper clips, coins, keys, nails, screws or other small metal objects, that can make 

a connection from one terminal to another. Shorting the battery terminals together may cause 

burns or a fire.

c) Do not expose battery pack to heat or fire. Avoid storage in direct sunlight.

d) Do not subject battery pack to mechanical shock.

e) In the event of battery leaking, do not allow the liquid to come into contact 

with the skin or eyes. If contact has been made, wash the affected area with 

copious amounts of water and seek medical advice.

f)  Keep battery pack clean and dry.

g) Wipe the battery pack terminals with a clean dry cloth if they become dirty.

h) Battery pack needs to be charged before use. Always refer to this instruction 

and use the correct charging procedure.

i)   Do not maintain battery pack on charge when not in use.

j)   After extended periods of storage, it may be necessary to charge and discharge 

the battery pack several times to obtain maximum performance.

k) Recharge only with the charger specified by Worx. Do not use any charger 

other than that specifically provided for use with the equipment.

  

l)   Do not use any battery pack which is not designed for use with the equipment.

m)Keep battery pack out of the reach of children.

n) Retain the original product literature for future reference.

o) Remove the battery from the equipment when not in use.

p) Dispose of properly.

q) Do not mix cells of different manufacture, capacity, size or type within a device.

r) Keep the battery away from microwaves and high pressure.

Summary of Contents for WR149E

























Reviews: