7
To
switch off
the machine, release the On/Off switch (1) or when it
is locked with the switch lock-on button (2), briefly press the On/Off
switch (1) and then release it.
VARIABLE SPEED CONTROL
The speed of the drill varies with the amount of pressure applied to
the on/off switch (1), i.e. more pressure for higher speed.
FORWARD AND REVERSE ROTATION CONTROL (See Fig D)
The forward and reverse selector switch (3) is used to reverse the
rotational direction of the machine. However, this is not possible with
the On/Off switch (1) actuated.
Forward rotation:
For drilling and screw driving use forward rotation
marked “
” (lever is moved to the left).
Reverse rotation:
Only use reverse rotation marked “
” (lever is
moved to the right) to remove screws or release a jammed drill bit.
Warning: Never change the direction of rotation when the
tool is rotating, wait until it has stopped.
SETTING THE OPERATING MODE
Drilling and Screwdriving
Press the lock button (9) and set the hammer or drill selector switch
(7) to the “Drilling” symbol.
Impact Drilling
Press the lock button (9) and set the hammer or drill selector switch
2
3
4
(7) to the “hammer” symbol.
The hammer or drill selector switch (7) engages noticeably and can
also be actuated with the machine running.
