6
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
Additional safety points for your
jigsaw
Remove the plug from the socket before carrying out any
adjustment, servicing or maintenance.
Fully unwind cable drum extensions to avoid potential overheating.
When an extension cable is required you must ensure it has the
correct ampere rating for your power tool and that it is in a safe
electrical condition.
Ensure your mains supply voltage is the same as your tool rating
plate voltage.
Your tool is double insulated for additional protection against a
possible electrical insulation failure within the tool.
Always check walls and ceilings to avoid hidden power cables and
pipes.
After long working periods, external metal parts and accessories
could be hot.
Wear eye protection when operating this tool.
The base plate must always be held firmly against the material
being cut to reduce saw vibration, blade jumping and blade
breakage.
If possible, ensure the workpiece is firmly clamped to prevent
movement.
Your Jigsaw is a hand held tools, do not clamp your Jigsaw.
Before cutting, check the cutting line is free of nails, screws, etc.
Never stop the cutting blade by applying side pressure to the blade.
Only withdraw the blade from the cut when the blade has stopped
moving.
Only use blades in excellent cutting condition.
Accessories
Blade
3pcs (Wood 1pc, Aluminium 1pc, Steel 1pc )
Hex key
1pc
Parallel guide
1pc
Dust tube
1pc
You can only use the blade type shown in fig. A.
Don’t use other
blade types.
We recommend that you purchase your accessories from the same
store that sold you the tool. Use good quality accessories marked
with a well-known brand name. Choose the type according to the
work you intend to undertake. Refer to the accessory packaging for
further details. Store personnel can assist you and offer advice.
•
•
•
•
