background image

11

Lithium-Ion Brushless drill driver

Lithium-Ion Brushless hammer drill

 EN

a qualified repair person using only 

identical replacement parts. 

This will 

ensure that the safety of the power tool is 
maintained.

DRILL SAFETY WARNINGS

1. Wear ear protectors when impact 

drilling. 

Exposure to noise can cause 

hearing loss.

2. Use auxiliary handle(s), if supplied 

with the tool. 

Loss of control can cause 

personal injury.

3. Hold power tool by insulated 

gripping surfaces, when performing 

an operation where the cutting 

accessory may contact hidden wiring. 

Cutting accessory contacting a “live” 
wire may make exposed metal parts of 
the power tool “live” and could give the 
operator an electric shock.

SAFETY WARNINGS FOR 

BATTERY PACK

a) Do not dismantle, open or shred cells 

or battery pack. 

b) Do not short-circuit a battery pack. Do 

not store battery packs haphazardly 

in a box or drawer where they may 

short-circuit each other or be  

short-circuited by conductive 

materials. 

When battery pack is not in 

use, keep it away from other metal objects, 
like paper clips, coins, keys, nails, screws 
or other small metal objects, that can 
make a connection from one terminal to 
another. Shorting the battery terminals 
together may cause burns or a fire.

c) Do not expose battery pack to heat or 

fire. Avoid storage in direct sunlight.

d) Do not subject battery pack to 

mechanical shock.

e) In the event of battery leaking, do not 

allow the liquid to come into contact 

with the skin or eyes. If contact has 

been made, wash the affected area 

with copious amounts of water and 

seek medical advice.

f)  Seek medical advice immediately 

if a cell or battery pack has been 

swallowed.

g) Keep battery pack clean and dry.

h) Wipe the battery pack terminals with a 

clean dry cloth if they become dirty.

i)  Battery pack needs to be charged before 

use. Always refer to this instruction and 

use the correct charging procedure.

j)  Do not maintain battery pack on 

charge when not in use.

k) After extended periods of storage, 

it may be necessary to charge and 

discharge the battery pack several 

times to obtain maximum performance.

l)  Battery pack gives its best 

performance when it is operated at 

normal room temperature (20°C ± 5°C).

m) When disposing of battery packs, 

keep battery packs of different 

electrochemical systems separate 

from each other.

n) Recharge only with the charger 

specified by WORX. Do not use any 

charger other than that specifically 

provided for use with the equipment. 

A charger that is suitable for one type of 
battery pack may create a risk of fire when 
used with another battery pack. 

o) Do not use any battery pack which 

is not designed for use with the 

equipment.

p) Keep battery pack out of the reach of 

children.

q) Retain the original product literature 

for future reference.

r)  Remove the battery from the 

equipment when not in use.

s) Dispose of properly.

Summary of Contents for WX174

















Reviews: