27
Torsion adjustment
The torque of three gears can be
adjusted according to the demand by
using the torque adjustment button
3. The machine has its own torque
protection function,
1st gear:
Suitable for screwing in or out small
diameter screws
3rd gear:
Suitable for screwing in or out large
diameter screws
See Fig E
OPERATION
Torsion adjusting
Before each use, please
adjust to the appropriate
torque gear, otherwise it’s easy to
slip
See Fig E
Power display operation
Press and hold the power display
button 3 for more than 3 seconds
See Fig F
MAINTENANCE
Your power tool requires no additional lubrication or
maintenance. There is no user serviceable parts in your
power tool. Never use water or chemical cleaners to
clean your power tool. Wipe clean with a dry cloth.
Always store your power tool in a dry place.
TROUBLE SHOOTING
problem
Possible cause
Solution
Battery will
not charge
1. USB cable not
plugged in
2. Surrounding
air temperature
is too hot or too
cold
1. Plug in the USB
cable again, and
check the status
of the lamp and
check whether
the current is
connected
2. Move the
product to an
environment
with appropriate
temperature for
charging
During
operation,
the
screwdriver
stops
working
The battery of
screwdriver is
dead, or the
torque cannot
reach
Charge or increase
torque
ENVIRONMENTAL PROTECTION
Disposal
The machine, its accessories and
packaging materials should be sorted for
environmentally friendly recycling. The plastic
components are labeled for categorized recycling.
Summary of Contents for WX240
Page 2: ...2 3 4 5 1 6 ...
Page 3: ...1 2 A B C D ...
