10
Lithium-Ion Brushless impact wrench EN
1. FORWARD/REVERSE ROTATION SWITCH
2. BATTERY PACK *
3. HOOK
4. BATTERY PACK RELEASE BUTTON *
5. ON/OFF SWITCH
6. LED LIGHT
7. SQUARE DRIVER
* Not all the accessories illustrated or
described are included in standard delivery.
TECHNICAL DATA
Type
WX279 WX279.9 (279 - designation of
machinery, representative of Impact Wrench)
WX279
WX279.9
Voltage
20V Max**
No-load speed
0-1300/2100/2900/min
Impact rate
0-1600/2900/3300bpm
Max torque
100/180/300N.m
Chuck size
1/2"(13mm)
Machine weight
1.5 kg
1.1 kg
** Voltage measured without workload. Initial battery
voltage reaches maximum of 20 volts. Nominal
voltage is 18 volts.
NOISE INFORMATION
A weighted sound pressure
L
pA
: 78dB(A)
A weighted sound power
L
wA
: 89dB(A)
K
pA
&K
wA
3.0dB(A)
Wear ear protection.
VIBRATION INFORMATION
Vibration total values (triax vector sum) determined
according to EN 62841:
Typical
weighted
vibration
Vibration emission value a
h
= 9,46m/s
2
Uncertainty K = 1.5m/s²
The declared vibration total value and the declared
noise emission value have been measured in
accordance with a standard test method and may
be used for comparing one tool with another.
The declared vibration total value and the declared
noise emission value may also be used in a
preliminary assessment of exposure.
WARNING:
The vibration and noise emissions
during actual use of the power tool can differ
from the declared value depending on the ways in
which the tool is used especially what kind of
workpiece is processed dependant on the following
examples and other variations on how the tool is used:
How the tool is used and the materials being cut or
drilled.
The tool being in good condition and well
maintained.
The use of the correct accessory for the tool and
ensuring it is sharp and in good condition.
The tightness of the grip on the handles and if any
anti vibration and noise accessories are used.
And the tool is being used as intended by its design
and these instructions.
This tool may cause hand-arm vibration
syndrome if its use is not adequately
managed.
WARNING:
To be accurate, an estimation of
exposure level in the actual conditions of use
should also take account of all parts of the
operating cycle such as the times when the tool is
switched off and when it is running idle but not
actually doing the job. This may significantly reduce
the exposure level over the total working period.
Helping to minimise your vibration and noise
exposure risk.
Always use sharp chisels, drills and blades.
Maintain this tool in accordance with these
instructions and keep well lubricated (where
appropriate).
If the tool is to be used regularly then invest in anti
vibration and noise accessories.
Plan your work schedule to spread any high
vibration tool use across a number of days.
ACCESSORIES
WX279
WX279.9
Hook
1
1
Battery pack
(WA3551)
2
/
Charger
(WA3860)
1
/
We recommend that you purchase your accessories
listed in the above list from the same store that sold
you the tool. Refer to the accessory packaging for
further details. Store personnel can assist you and
offer advice.
Summary of Contents for WX279
