Worx WX390, Safety And Operating Manual

8

WX390 WX390.X

Cordless Rotary Hammer

The correct power tool will do the job better 

and safer at the rate for which it was designed. 

b)   Do not use the power tool if the switch 

does not turn it on and off. 

Any power tool 

that cannot be controlled with the switch is 

dangerous and must be repaired.

c)   Disconnect the plug from the power 

source and/or the battery pack from 

the power tool before making any 

adjustments, changing accessories, or 

storing power tools. 

Such preventive safety 

measures reduce the risk of starting the power 

tool accidentally. 

d)   Store idle power tools out of the reach 

of children and do not allow persons 

unfamiliar with the power tool or these 

instructions to operate the power tool. 

Power tools are dangerous in the hands of 

untrained users. 

e)   Maintain power tools. Check for 

misalignment or binding of moving 

parts, breakage of parts and any other 

condition that may affect the power tool’s 

operation. If damaged, have the power 

tool repaired before use.

 Many accidents are 

caused by poorly maintained power tools. 

f)  Keep cutting tools sharp and clean.

Properly maintained cutting tools with sharp 

cutting edges are less likely to bind and are 

easier to control. 

g)   Use the power tool, accessories and 

tool bits etc. in accordance with these 

instructions, taking into account the 

working conditions and the work to 

be performed. 

Use of the power tool for 

operations different from those intended could 

result in a hazardous situation. 

5.  BATTERY TOOL USE AND CARE

a)   Recharge only with the charger specified 

by the manufacturer.

 A charger that is 

suitable for one type of battery pack may create 

a risk of fire when used with another battery 

pack.

b)   Use power tools only with specifically 

designated battery packs.

 Use of any other 

battery packs may create a risk of injury and 

fire.

c)   When battery pack is not in use, keep it 

away from other metal objects, like paper 

clips, coins, keys, nails, screws or other 

small metal objects, that can make a 

connection from one terminal to another.

Shorting the battery terminals together may 

cause burns or a fire.

d)   Under abusive conditions, liquid may be 

ejected from the battery; avoid contact. 

If contact accidentally occurs, flush with 

water. If liquid contacts eyes, additionally 

seek medical help.

 Liquid ejected from the 

battery may cause irritation or burns.

6. SERVICE

a)   Have your power tool serviced by a 

qualified repair person using only 

identical replacement parts. 

This will ensure 

that the safety of the power tool is maintained.

HAMMER SAFETY WARNINGS

1.  Wear ear protectors. 

Exposure to noise can 

cause hearing loss.

2.  Use auxiliary handles, If supplied with 

the tool. 

Loss of control can cause personal 

injury.

3.  Hold power tools by insulated gripping 

surfaces, when performing an operation 

where the cutting accessory may contact 

hidden wiring. 

Cutting accessory contacting 

a ‘live’ wire may make exposed metal parts 

of the power tool ‘live’ and could give the 

operator an electric shock. 

SAFETY WARNINGS FOR 

BATTERY PACK

a)  Do not dismantle, open or shred cells a) 

Do not dismantle, open or shred cells or 

battery pack. 

b)  Do not short-circuit a battery pack. Do 

not store battery packs haphazardly in 

a box or drawer where they may short-

circuit each other or be short-circuited 

by conductive materials.

 When battery 

pack is not in use, keep it away from other 

metal objects, like paper clips, coins, keys, 

nails, screws or other small metal objects, 

that can make a connection from one terminal 

to another. Shorting the battery terminals 

together may cause burns or a fire.

c)  Do not expose battery pack to heat or fire.