Lithium-Ion cordless reciprocating saw
EN
6
1. BLADE*
2. LED LIGHT
3. HAND GRIP AREAS
4. LOCK-OFF BUTTON
5. BATTERY PACK RELEASE BUTTON
6. BATTERY PACK*
7. ON/OFF TRIGGER SWITCH
8. PENDULUM ACTION CONTROL
9. BLADE CLAMP RELEASE LEVER
10. ADJUSTABLE PIVOT FOOT PLATE
* Not all the accessories illustrated or
described are included in standard delivery.
TECHNICAL DATA
Type
WX508 WX508.9 (5-designation of
machinery, representative of Saw)
WX508
WX508.9
Voltage
20V
Max**
No load speed
0-3000/min
Charging time
1h (approx.)
--------
Stock length
22mm
Cutting
capacity
Wood
177mm
Steel
12mm
Pipe
76mm
Battery pack
2.0Ah Li-Ion
------------
Pendulum position
4
Machine Weight
2.51kg
2.15kg
**Voltage measured without workload. Initial battery
voltage reaches maximum of 20 volts. Nominal
voltage is 18 volts.
NOISE INFORMATION
A weighted sound pressure
L
pA
: 80.7dB(A)
A weighted sound power
L
wA
: 91.7dB(A)
K
pA
&K
wA
3.0dB(A)
Wear ear protection
VIBRATION INFORMATION
Vibration total values (triax vector sum)
determined according to EN 60745:
Cutting boards
Vibration emission value
a
h,B
= 6.077m/s
2
Uncertainty K = 1.5m/s²
Cutting wooden
beams
Vibration emission value
a
h,WB
= 7.744m/s
2
Uncertainty K = 1.5m/s²
The declared vibration total value may be used for
comparing one tool with another, and may also be
used in a preliminary assessment of exposure.
WARNING:
The vibration emission value
during actual use of the power tool can differ
from the declared value depending on the ways in
which the tool is used dependant on the following
examples and other variations on how the tool is
used:
How the tool is used and the materials being cut .
The tool being in good condition and well
maintained
The use the correct accessory for the tool and
ensuring it is sharp and in good condition.
The tightness of the grip on the handles and if any
anti vibration accessories are used.
And the tool is being used as intended by its design
and these instructions.
This tool may cause hand-arm vibration
syndrome if its use is not adequately
managed.
WARNING:
To be accurate, an estimation
of exposure level in the actual conditions
of use should also take account of all parts of the
operating cycle such as the times when the tool
is switched off and when it is running idle but not
actually doing the job. This may significantly reduce
the exposure level over the total working period.
Helping to minimise your vibration exposure risk.
Maintain this tool in accordance with these
instructions and keep well lubricated (where
appropriate)
If the tool is to be used regularly then invest in anti
vibration accessories.
Avoid using tools in temperatures of 10
0
C or less
Plan your work schedule to spread any high
vibration tool use across a number of days.
