Worx WX508L, Manual

Cordless  Reciprocating  Saw                     EN

7

correct power tool for your application.

The correct power tool will do the job better 

and safer at the rate for which it was designed. 

b)  Do not use the power tool if the switch 

does not turn it on and off. 

Any power tool 

that cannot be controlled with the switch is 

dangerous and must be repaired.

c)  Disconnect the plug from the power 

source and/or the battery pack from 

the power tool before making any 

adjustments, changing accessories, or 

storing power tools.

 Such preventive safety 

measures reduce the risk of starting the power 

tool accidentally.

d)  Store idle power tools out of the reach 

of children and do not allow persons 

unfamiliar with the power tool or these 

instructions to operate the power tool.

Power tools are dangerous in the hands of 

untrained users.

e)  Maintain power tools. Check for 

misalignment or binding of moving 

parts, breakage of parts and any other 

condition that may affect the power tool`s 

operation. If damaged, have the power 

tool repaired before use.

 Many accidents 

are caused by poorly maintained power tools.

f)  Keep cutting tools sharp and clean.

Properly maintained cutting tools with sharp 

cutting edges are less likely to bind and are 

easier to control.

g)  Use the power tool, accessories and 

tool bits etc., in accordance with 

these instructions and in the manner 

intended for the particular type of power 

tool, taking into account the working 

conditions and the work to be performed.

Use of the power tool for operations different 

from those intended could result in a hazardous 

situation.

5.  BATTERY TOOL USE AND CARE

a)  Recharge only with the charger specified 

by the manufacturer. 

A charger that is 

suitable for one type of battery pack may 

create a risk of fire when used with another 

battery pack.

b)  Use power tools only with specifically 

designated battery packs.

 Use of any other 

battery packs may create a risk of injury and fire.

c)  When battery pack is not in use, keep it 

away from other metal objects, like paper 

clips, coins, keys, nails, screws or other 

small metal objects, that can make a 

connection from one terminal to another.

Shorting the battery terminals together may 

cause burns or a fire.

d)  Under abusive conditions, liquid may be 

ejected from the battery; avoid contact. 

If contact accidentally occurs, flush with 

water. If liquid contacts eyes, additionally 

seek medical help.

 Liquid ejected from the 

battery may cause irritation or burns.

6. SERVICE

a)  Have your power tool serviced by 

a qualified repair person using only 

identical replacement parts. 

This will 

ensure that the safety of the power tool is 

maintained.

RECIPROCATING SAW 

SAFETY WARNINGS

1.  Hold reciprocating saw by insulated 

gripping surfaces, when performing an 

operation where the cutting accessory 

may contact hidden wiring .

Cutting 

accessory contacting a “live” wire may make 

exposed metal parts of the power tool “live” 

and could give the operator an electric shock.

2.  Use clamps or another practical way to 

secure and support the workpiece to a 

stable platform. 

Holding the work by hand or 

against your body leaves it unstable and may 

lead to loss of control.

ADDITIONAL 

SAFETY RULES FOR 

RECIPROCATING SAW

1.  Always wear a dust mask.

BATTERY PACK SAFETY 

WARNINGS

1)  WARNING: Risk of fire and burns. Do not 

disassemble, heat above 100°C (212°F), 

or incinerate. Do not expose cells or 

batteries to heat or fire. Avoid storage in 

direct sunlight.

2)  Dispose of used battery promptly.. When 

disposing of secondary cells or batteries, 

keep cells or batteries of different 

electrochemical systems separate from 

each other.

3)  Keep battery out of reach of children and 

in original package until ready to use. 

4)  Never put batteries in mouth. If 

swallowed, contact your physician or 

local poison control center.

5)  CAUTION – The battery used in this 

device may present a risk of fire or 

chemical burn if mistreated. Replace 

battery with WORX only. Use of another 

battery may present a risk of fire or 

explosion.

6)  Warning: Do not use a visibly damaged 

battery pack or appliance as applicable.

7)  Warning: Do not modify or attempt to 

repair the appliance or the battery pack