Worx WX530L, Manual

Cordless Circular Saw 

EN

2

PRODUCT SAFETY

WARNING: Some dust created by power 

sanding, sawing, grinding, drilling 

and other construction activities contains 

chemicals known to the State of California 

to cause cancer, birth defects or other 

reproductive harm. Some examples of these 

chemicals are:

•  Lead from lead-based paints;

•  Crystalline silica from bricks and cement 

and other masonry products 

•  Arsenic and chromium from  

chemically-treated lumber.

Your risk from these exposures varies, 

depending on how often you do this type 

of work. To reduce your exposure to these 

chemicals, work in a well ventilated area, 

and work with approved safety equipment, 

such as those dust masks that are specially 

designed to filter out microscopic particles.

WARNING:  This product can expose you 

to chemicals including lead, phthalate 

or bisphenol A which are known to the State 

of California to cause cancer, birth defects or 

other reproductive harm. Wash your hands 

after use. For more information go to www.

P65Warnings.ca.gov. 

GENERAL POWER TOOL 

SAFETY WARNINGS

WARNING: Read all safety warnings, 

instructions, illustrations and 

specifications provided with this power tool.  

Failure to follow the warnings and instructions may 

result in electric shock, fire and/or serious injury.  

Save all warnings and instructions for future 

reference.

The term power tool in the warnings refers to your 

electric (corded) power tool or battery-operated 

(cordless) power tool.

1.  WORK AREA SAFETY

a)  Keep work area clean and well lit. 

Cluttered or dark areas invite accidents.

b)  Do not operate power tools in explosive 

atmospheres, such as in the presence of 

flammable liquids, gases or dust. 

Power 

tools create sparks which may ignite the dust 

or fumes.

c)  Keep children and bystanders away while 

operating a power tool.

 Distractions can 

cause you to lose control.

2.  ELECTRICAL SAFETY

a)  Power tool plugs must match the outlet. 

Never modify the plug in any way. Do 

not use any adapter plugs with grounded 

power tools.

 Unmodified plugs and matching 

outlets will reduce risk of electric shock.

b)  Avoid body contact with grounded 

surfaces such as pipes, radiators, ranges 

and refrigerators.

 There is an increased risk 

of electric shock if your body is grounded.

c)  Do not expose power tools to rain or wet 

conditions. 

Water entering a power tool will 

increase the risk of electric shock.

d)  Do not abuse the cord. Never use the 

cord for carrying, pulling or unplugging 

the power tool. Keep cord away from 

heat, oil, sharp edges or moving parts.

Damaged or entangled cords increase the risk 

of electric shock.

e)  When operating a power tool outdoors, 

use an extension cord suitable for 

outdoor use marked “W-A” or “W”. 

Use of 

a cord suitable for outdoor use reduces the risk 

of electric shock.

f)  If operating a power tool in a damp 

location is unavoidable,use a residual 

current device (RCD) protected supply. 

Use of an RCD reduces the risk of electric shock.

3.  PERSONAL SAFETY

a)  Stay alert, watch what you are doing 

and use common sense when operating 

a power tool. Do not use a power tool 

while you are tired or under the influence 

of drugs, alcohol or medication. 

A moment 

of inattention while operating power tools may 

result in serious personal injury.

b)  Use personal protective equipment. 

Always wear eye protection.

 Protective 

equipment such as dust mask, non-skid safety 

shoes, hard hat, or hearing protection used for 

appropriate conditions will reduce personal 

injuries. 

c)  Prevent unintentional starting. Ensure 

the switch is in the off-position before 

connecting to power source and/or 

battery pack, picking up or carrying the 

tool. 

Carrying power tools with your finger on 

the switch or energizing power tools that have 

the switch on invites accidents. 

d)  Remove any adjusting key or wrench 

before turning the power tool on. 

A 

wrench or a key left attached to a rotating part 

of the power tool may result in personal injury. 

e)  Do not overreach. Keep proper footing 

and balance at all times. 

This enables 

better control of the power tool in unexpected 

situations. 

f)  Dress properly. Do not wear loose 

clothing or jewellery. Keep your hair and 

clothing away from moving parts. 

Loose 

clothes, jewellery or long hair can be caught in 

moving parts.

g)  If devices are provided for the connection 

of dust extraction and collection facilities, 

ensure these are connected and properly 

used. 

Use of dust collection can reduce  

dust-related hazards.