Worx WX530L, Manual

Cordless Circular Saw 

EN

3

h)   Do not let familiarity gained from 

frequent use of tools allow you to 

become complacent and ignore tool 

safety principles. 

A careless action can 

cause severe injury within a fraction of a 

second. 

4.  POWER TOOL USE AND CARE 

a)  Do not force the power tool. Use the 

correct power tool for your application.

The correct power tool will do the job better 

and safer at the rate for which it was designed. 

b)  Do not use the power tool if the switch 

does not turn it on and off. 

Any power tool 

that cannot be controlled with the switch is 

dangerous and must be repaired.

c)  Disconnect the plug from the power 

source and/or the battery pack from 

the power tool before making any 

adjustments, changing accessories, or 

storing power tools.

 Such preventive safety 

measures reduce the risk of starting the power 

tool accidentally.

d)  Store idle power tools out of the reach 

of children and do not allow persons 

unfamiliar with the power tool or these 

instructions to operate the power tool.

Power tools are dangerous in the hands of 

untrained users.

e)  Maintain power tools. Check for 

misalignment or binding of moving parts, 

breakage of parts and any other condition 

that may affect the power tool`s 

operation. If damaged, have the power 

tool repaired before use.

 Many accidents 

are caused by poorly maintained power tools.

f)  Keep cutting tools sharp and clean.

Properly maintained cutting tools with sharp 

cutting edges are less likely to bind and are 

easier to control.

g)  Use the power tool, accessories and 

tool bits etc., in accordance with 

these instructions and in the manner 

intended for the particular type of power 

tool, taking into account the working 

conditions and the work to be performed.

Use of the power tool for operations different 

from those intended could result in a 

hazardous situation.

h)   Keep handles and grasping surfaces 

dry, clean and free from oil and grease. 

Slippery handles and grasping surfaces do not 

allow for safe handling and control of the tool 

in unexpected situations.

5.  BATTERY TOOL USE AND CARE

a)  Recharge only with the charger specified 

by the manufacturer. 

A charger that is 

suitable for one type of battery pack may 

create a risk of fire when used with another 

battery pack.

b)  Use power tools only with specifically 

designated battery packs.

 Use of any other 

battery packs may create a risk of injury and fire.

c)  When battery pack is not in use, keep it 

away from other metal objects, like paper 

clips, coins, keys, nails, screws or other 

small metal objects, that can make a 

connection from one terminal to another.

Shorting the battery terminals together may 

cause burns or a fire.

d)  Under abusive conditions, liquid may be 

ejected from the battery; avoid contact. 

If contact accidentally occurs, flush 

with water. If liquid contacts eyes, 

additionally seek medical help.

 Liquid 

ejected from the battery may cause irritation or 

burns.

e)   Do not use a battery pack or tool that is 

damaged or modified. 

Damaged or modified 

batteries may exhibit unpredictable behaviour 

resulting in fire, explosion or risk of injury. 

f)    Do not expose a battery pack or tool to 

fire or excessive temperature.

 Exposure 

to fire or temperature above 130 °C may cause 

explosion. 

g)   Follow all charging instructions and 

do not charge the battery pack or tool 

outside the temperature range specified 

in the instructions. 

Charging improperly or 

at temperatures outside the specified range 

may damage the battery and increase the risk 

of fire. 

6. SERVICE

a)  Have your power tool serviced by 

a qualified repair person using only 

identical replacement parts. 

This will 

ensure that the safety of the power tool is 

maintained.

b)   Never service damaged battery packs. 

Service of battery packs should only be 

performed by the manufacturer or authorized 

service providers.

SAFETY WARNINGS FOR 

ALL SAWS

a) 

DANGER: Keep hands away from 

cutting area and the blade. Keep your 

second hand on auxiliary handle, or motor 

housing. 

If both hands are holding the saw, 

they cannot be cut by the blade.

b)  Do not reach underneath the workpiece. 

The guard cannot protect you from the blade 

below the workpiece.

c)  Adjust the cutting depth to the thickness 

of the workpiece.

 Less than a full tooth of 

the blade teeth should be visible below the 

workpiece.

d)  Never hold piece being cut in your hands 

or across your leg. Secure the workpiece 

to a stable platform.

 It is important to 

support the work properly to minimize body 

exposure, blade binding, or loss of control.