13
12
Belt sander EN
13
12
PLUg REPLACEmENT
(UK & IRELAND ONLy)
If you need to replace the fitted plug then
follow the instructions below.
IMPORTaNT
The wires in the mains lead are colored in
accordance with the following code:
BLUE = NEUTRaL
BROwN = LIVE
As the colors of the wires in the mains lead of
this appliance may not correspond with the
colored markings identifying the terminals
in your plug, proceed as follows. The wire
which is colored blue must be connected to
the terminal which is marked with N. The wire
which is colored brown must be connected to
the terminal which is marked with L.
waRNING:
Never connect live or neutral
wires to the earth terminal of the plug. Only
fit an approved 13ABS1363/A plug and the
correct rated fuse.
NOTE:
If a moulded plug is fitted and has to
be removed take great care in disposing of the
plug and severed cable, it must be destroyed
to prevent engaging into a socket.
DECLARATION Of
CONfORmITy
We,
POSITEC Germany GmbH
Konrad-Adenauer-Ufer 37
50668 Köln
Declare that the product,
Description
wORx Belt sander
Type
wx661 wx661.1(660-669-
designation of machinery, representative
of belt sander)
Function
Remove surface material with an
endless abrasive belt
Complies with the following Directives,
2006/42/EC
2011/65/EU
2004/108/EC
Standards conform to:
EN 60745-1
EN 60745-2-4
EN 61000-3-2
EN 61000-3-3
EN 55014-2
EN 55014-1
The person authorized to compile the
technical file,
Name Russell Nicholson
address Positec Power Tools (Europe)
Ltd, PO Box 152,Leeds,LS10 9DS,UK
2013/11/13
Leo Yue
POSITEC Quality Manager
Connect
Blue to N
(neutral)
Outer sleeve
firmly clamped
Cable grip
Brown L (live)
13 Amp fuse approved
to BS1362
Summary of Contents for WX661
