Worx WX801L, Manual

Cordless Mini Cutter 

EN

7

hearing protection used for appropriate 

conditions will reduce personal injuries. 

c)   Prevent unintentional starting. 

Ensure the switch is in the off-

position before connecting to power 

source and/or battery pack, picking 

up or carrying the tool. 

Carrying 

power tools with your finger on the 

switch or energising power tools that 

have the switch on invites accidents. 

d)   Remove any adjusting key or wrench 

before turning the power tool on. 

A 

wrench or a key left attached to a rotating 

part of the power tool may result in 

personal injury. 

e)   Do not overreach. Keep proper 

footing and balance at all times. 

This 

enables better control of the power tool 

in unexpected situations. 

f)   Dress properly. Do not wear loose 

clothing or jewellery. Keep your 

hair and clothing away from moving 

parts. 

Loose clothes, jewellery or long 

hair can be caught in moving parts.

g)   If devices are provided for the 

connection of dust extraction and 

collection facilities, ensure these 

are connected and properly used. 

Use of dust collection can reduce dust-

related hazards.

4)  Power tool use and care 

a)   Do not force the power tool. Use 

the correct power tool for your 

application. 

The correct power tool will 

do the job better and safer at the rate for 

which it was designed. 

b)   Do not use the power tool if the 

switch does not turn it on and off. 

Any power tool that cannot be controlled 

with the switch is dangerous and must be 

repaired.

c)   Disconnect the plug from the power 

source and/or remove the battery 

pack, if detachable, from the power 

tool before making any adjustments, 

changing accessories, or storing 

power tools. 

Such preventive safety 

measures reduce the risk of starting the 

power tool accidentally. 

d)  Store idle power tools out of the 

reach of children and do not allow 

persons unfamiliar with the power 

tool or these instructions to operate 

the power tool. 

Power tools are 

dangerous in the hands of untrained users. 

e)   Maintain power tools and 

accessories. Check for misalignment 

or binding of moving parts, 

breakage of parts and any other 

condition that may affect the power 

tool’s operation. If damaged, have 

the power tool repaired before use. 

Many accidents are caused by poorly 

maintained power tools.

f)   Keep cutting tools sharp and clean. 

Properly maintained cutting tools with 

sharp cutting edges are less likely to bind 

and are easier to control. 

g)   Use the power tool, accessories 

and tool bits etc. in accordance 

with these instructions, taking into 

account the working conditions and 

the work to be performed. 

Use of 

the power tool for operations different 

from those intended could result in a 

hazardous situation. 

5)  Battery tool use and care 

a)   Recharge only with the charger 

specified  

by the manufacturer. 

A charger that is suitable for one type 

of battery pack may create a risk of fire 

when used with another battery pack. 

b)   Use power tools only with 

specifically designated battery 

packs. 

Use of any other battery packs 

may create a risk of injury and fire. 

c)   When battery pack is not in use, 

keep it away from other metal 

objects, like paper clips, coins, 

keys, nails, screws or other small 

metal objects, that can make a 

connection from one terminal to 

another. 

Shorting the battery terminals 

together may cause burns or a fire.

d)   Under abusive conditions, 

liquid may be ejected from the 

battery; avoid contact. If contact 

accidentally occurs, flush with 

water. If liquid contacts eyes, 

additionally seek medical help. 

Liquid ejected from the battery may 

cause irritation or burns.

6)  Service 

a)   Have your power tool serviced by 

a qualified repair person using only 

identical replacement parts. 

This will 

ensure that the safety of the power tool is 

maintained.