background image

20V Battery Powered & Electric Cooler 

EN

13

12

Setting the Temperature

Note: Batteries must be installed or 

cooler connected to power source to 

change settings

Reset Temperature

Turn the cooler OFF, then press the Cool-

ing Mode button for 3 seconds until E1 

is displayed. Long press +- at the same 

time for 3 seconds to reset. 

Note: The minimum temperature set-

ting is -20°C / -4°F

Setting the Temperature

Turn ON the cooler. Use the +- buttons to 

select desired temperature.

 

Note: Temperature setting range is 

-20°C-20°C / -4°F-68°F

Setting the Temperature Unit

Turn the cooler OFF. Long press the 

Cooling Mode button for 3 seconds 

until E1 is displayed. Then press the 

Cooling Mode button again until E5 is 

shown. Press + or - to select Celsius or 

Fahrenheit.

Note: Factory default is Celsius/°C

See 

Fig. D

Usage 

The cooler can be used without the 

batteries if connected to the AC power 

supply or the cigarette lighter adaptor.

Note

1. For best cooling results and extended 

runtime, pre-cool the cooler with the 

AC power supply or cigarette lighter 

adaptor. When the cooler has reached 

desired temperature, install the batteries 

for portable cooling.

See Fig. 

E1,E2,E3

BATTERY PROTECTION MODE

In order to prevent the cooler from running down the 

car battery, the cooler is equipped with BATTERY 

PROTECTION MODE.

How to select BATTERY PROTECTION MODE:

1. When the cooler is ON, press the Cooling Mode 

button for 3 seconds until screen flashes, then 

press the Cooling Mode button again to select 

protection mode H (high), M (medium, L (low). 

Default setting is H (high) mode.

INPUT DC  12V

DC  24V

CUT 

OUT

CUT IN

CUT 

OUT

CUT IN

H

8.5V

10.9V

21.3V

22.7V

M

10.1V 11.4V

22.3V

23.7V

L

11.1V 12.4V

24.3V

25.7V

Note:

1. It is suggested to select H when connected to 

car power, while, M or L should be set when it is 

connected to a portable battery or other back-up 

battery.

RECOMMENDED TEMPERATURE 

FOR COMMON FOOD

Common Food

Recommended Temperature

Fruits

5~8° C/41 ~46° F

Vegetable

3~ l0°C/37~50° F

Meat

-l8°C/0° F

Drinks

5

o

C/41

o

F

Cold Cuts/

Cheese

4

o

C/39

o

F

Wine

l0° C/50° F

Ice cream

-10°C/14° F 

6. CLEANING 

Clean the cooler by using a wet cloth to wipe out the 

inside after use. 

WARNING:

1. Turn the cooler off and unplug the product 

before cleaning the cooler.

2. Do not submerge the cooler or rinse it with 

water.

3. Do not use any abrasive cleaning agents to clean 

the cooler as these agents may cause damages to 

the product.

7. STORAGE

Short-time storage

Turn the cooler OFF and unplug the product. Use a dry 

cloth to clean the inside of the cooler and place it in stor-

age.

Long-time storage

1. Switch off and unplug the device;

Summary of Contents for WX876L
















Reviews: