5
STANDARD VENETIAN BLIND
06/2019
©
WO
UND
WO
If the standard venetian blind curtain is fully closed or opened, do not
continue to forcibly pull the operating cord – this could damage the system.
Never allow children to play with the operating equipment (operating cord)!
No system parts must be opened or removed when cleaning and caring for the standard venetian blind. Should this be necessary,
contact a specialist dealer.
Heavy dirt deposits can lead to stiffness or damages and reduce the product lifetime, so remove any dirt sticking to the curtain sur-
face on a regular basis. When doing so, also remove dirt or objects from the guide rails.
Also ensure that it is not possible to manually operate the system by accident or that the system can power up or shut down automa-
tically.
Only use commercially available, solvent-free cleaner and clean water to clean the standard venetian blind. Do not use aggressive
cleaning agents, solvents such as alcohol or benzine, or scouring agents or scouring pads.
Never lubricate the standard venetian blind mechanics or the motor!
Contact a specialist dealer if the system is making a great deal of noise or is stiff.
If the standard venetian blind curtain is fully closed or opened, do not continue to forcibly turn the operating crank – this could dama-
ge the system. When turning the crank, ensure that the direction of rotation is correct.
Too great a deflection on the operating crank (connecting shaft) leads to stiffness and excessive wear.
7.3 STANDARD VENETIAN BLINDS WITH CRANK OPERATION
8. CLEANING AND CARE
7.4 STANDARD VENETIAN BLINDS WITH CORD OPERATION
Reliable and safe use of the standard venetian blind can only be guaranteed if the system is checked and maintained on a regular
basis. so check the standard venetian blind regularly for signs of wear or damage, especially in the area of the textiles used, such as
hoisting belts and suspension cords. Standard venetian blinds needing repair must not be operated. Always contact an appropriate
specialist dealer for any maintenance or repair work.
Do not attempt to repair electrical parts by yourself – danger of death! Contact a specialist dealer in the event of faults.
For standard venetian blinds that can be operated outside of the user‘s field of vision, the user must take appropriate measures to pre-
vent undesirable operation of the standard venetian blinds during maintenance or repair work.
Standard venetian blind slats can twist within the suspension cord when subjected to wind loading, for instance. To restore proper
functioning again, the relevant slat can be rearranged inside the suspension cord again.
Only the spare parts approved by
WO
UND
WO
may be used to replace worn or defective parts, otherwise any warranty and guarantee
claims shall cease to be valid.
Improper disassembly of the standard venetian blind can cause personal injury or property damage, so only have an appropriate spe-
cialist dealer perform disassembly work.
Please refer to the relevant instructions for assembly for the specifications and notices on disassembling the standard venetian blind.
9. MAINTENANCE
10. DISASSEMBLY
