www.woundwo.com
4
PLEATED BLINDS
Mechanical and drive elements are made from plastic or corrosion-resistant steel and thus do not require maintenance.
Mild soiling
Carefully rinse coated elements such as the upper or lower rail, or plastic parts with a soft sponge and lukewarm water. Cleaning with a
cleaning agent with an antistatic effect prevents the area from being soiled again.
Before cleaning, ensure that there are no impurities on the painted metal parts that may scratch or abrade.
Curtain cleaning
WO
UND
WO
pleated blinds are generally washable. More precise details can be obtained from your
WO
UND
WO
dealer.
In case of heavily soiled pleated blinds, contact your dealer or a suitable company specialising in the cleaning of buildings.
NOTE:
• Do not use any kinds of abrasive agents e.g. pastes or liquids etc.
• Do not use any mechanical aids e.g. scrapers or spatulas etc.
• Do not use high-pressure steam cleaners.
• Do not use any solvents or alcohol (white spirit).
Improper cleaning of the curtain can cause the fabric to either partially or completely lose its flame-resistant and anti-ageing properties.
2. MAINTENANCE AND CARE
Textiles are subject to wear and tear and can undergo natural changes due to UV radiation, heat and water. These may cause stretching,
shrinkage and bleaching and hence potentially affect the function (closing behaviour, hanging) of the blind.
Due to technical changes, over which we have no influence, there may be visible differences between the sample product and the delivered product.
Due to changes in the collection or the batch, there may be slight changes in the colour in case of repeat orders or repairs.
No guarantees can be given in case of damage due to condensation, cleaning agents or insect excrement.
When cleaning windows and window frames, care must be taken to ensure that direct or indirect contact of the curtain with water
(condensation), strong or alkaline cleaning agents is avoided.
Pleated blinds must not be exposed to building moisture over a prolonged period in order to prevent corrosion damage. Condensation water
from ready-mixed mortar or coatings can lead to corrosion damage. Regular airing and drying out of condensation water on metal parts
maintains the quality of the blind.
Colour droplets which appear on the product due to painting must be immediately removed with a damp cloth, otherwise the proper
functionality of your pleated blind cannot be guaranteed.
All mechanical parts of the blind are hard-wearing, solidly constructed and very easy to use. However, if you encounter any problems or flaws,
please do not try to solve the problem yourself, but consult your nearest
WO
UND
WO
dealer. Your nearest dealer can be found at
www.woundwo.com
1.6 GENERAL INFORMATION
Due to a lack of perception, it is especially important to check the free fall of the curtain before use.
This applies in particular to systems which are operated via automatic control elements (sun sensors, temperature sensors, timers etc.).
If usage takes place several times in quick succession, then the thermal circuit breaker can kick in, meaning that the motor may not run
(lasts a few minutes) until the circuit has cooled down.
In case of malfunctions after a thunderstorm (indirect lightning strike), simply switching off and then switching on the corresponding circuit can
restore functionality.
Connection of the drive and additional devices must only be carried out by licensed electrical companies.
1.5 PLEATED BLIND WITH ELECTRIC DRIVE
