22
●
Geomagnetic correction for the drone, it is required (a must) when
consumer first buy/fly the drone or after changing the propellers/motors.
(Outdoor flying is to use the gps satellites for geomagnetic landmark
positioning. Positioning and auto return will be more accurate after a
new geomagnetic correction.)
●
When the power of the remote control or the drone is insufficient, the
remote control distance will be affected.
If the drone power is insufficient, it will be difficult to fly the drone or
even take off the drone.
●
If the drone is damaged or deformed, please repair it in time. If the
blade is broken or damaged, do not fly, otherwise it may cause injury.
Remove the battery from the remote control when it is not in use for a
long time. Avoid damage to this product caused by battery leakage.
Never allow the drone to crash or crash badly from high altitude, which
can damage the drone or shorten its service life.
●
In order to ensure the stability of the drone, when the drone hits the
object and suddenly drop, please put the drone on the horizontal ground
and stay for 2-3 seconds, after the automatic test level, then to try to fly
the drone again.
problem
possible cause
solution
The indicator lights of the
drone are flashing and does
not respond to the
transmitter.
Transmitter is not synced to
the drone.
Insufficient battery power.
Refer to the preparation
for FLIGHT and pair again.
Recharge the battery.
The propellers spin,but the
drone cannot take-off.
Insufficient battery power.
The propellers are installed
in wrong orientation.
The propellers are distorted.
Recharge the battery.
Install the propellers in
right orientation.
Replace the propellers.
The drone sways sharply.
The propellers are distorted. Replace the propellers.
