WowWee CHIP, User Manual

11

PLAY WITH CHiP™ - CHiP SMARTBAND™

PAIRING THE CHIP SMARTBALL™ AND 

CHIP SMARTBAND™

WEARING THE CHIP SMARTBAND™

The first time you use 
CHiP™, you might have 
to pair him with the 

CHiP SmartBall™ and 
CHiP SmartBand™. To 
do so, turn it on and 
then hold it on CHiP™’s 
back for a few seconds. 
The LED will stop flashing 
once the item is paired 
with CHiP™. It is 
advisable to try pairing 
the items with CHiP™ 
one at a time.

To put on the CHiP SmartBand™, 
push the strap through the 
large loop and then tighten the  
CHiP SmartBand™ comfortably 
around you wrist. Fasten it by 
pushing the blue catch through 
one of the smaller loops on 
the strap.

GETTING STARTED

The CHiP SmartBand™ is a key part of the CHiP™ experience. When you wear it, you and CHiP™  

are connected. 

CHIP SMARTBAND™ LAYOUT

There are 2 ways to use each button on your CHiP SmartBand™, either through a light tap, or by pushing and holding it.

The CHiP™ Button:

The CHiP™ button is like almost like saying “heel”. 

TAP

When you tap the CHiP™ button, it means you want CHiP™ to stop, look and listen. 
Whether CHiP™ is following you, chasing a ball, finding his bed, or doing a dance. 
 - If you want him to stop what he’s doing immediately and listen up, tap the CHiP™ button. 

HOLD

When you hold the CHiP™ button your band turns into a remote control. Think of the buttons 
like a joystick. The buttons indicate forward/backward/left and right. You can also get 
CHiP™ to spin if you hit the empty spaces on the band. 

NOTE:

  Simply hold the CHiP™ button again for 2 seconds to exit Drive Mode.

The Location Pin Button:

Follow Me CHiP™!! The Location Pin button serves two functions: come and follow.

TAP

When you tap the Location Pin button on the band, CHiP™’s eyes will turn teal blue, and 
he will come right over to you. Once he’s close, tap the CHiP™ button to make him stop in 
place. A key hint here is to always have the light on the band pointed at CHiP™’s eyes. If 
ever it appears as though CHiP™ isn’t listening, make sure CHiP™ is in range, and that his 
eyes can properly see the light on your CHiP SmartBand™. 

HOLD

When you hold the Location Pin button on the band, CHiP™’s eyes will turn teal as well 
only this time he’ll follow you around. Again, it’s key to make sure the light on the band is 
visible to CHiP™’s eyes. If ever you want to leave follow-me mode, all you need to do is 
hit the CHiP™ button. 

NOTE:

  Pressing the CHiP™ button will stop CHiP™ from coming to / following you.