background image

A Fusion of  Technology and Personality

USER MANUAL

CAUTION

Changes or modifications not expressly approved by the party responsible for compliance 

could void the user’s authorityto operate the equipment.

NOTE

This equipment has been tested and found to comply with the limits for a class B digital device, 

pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection 

against harmful interference in a residential installation.  This equipment generates, uses and can 

radiate radio frequency energy and, if not installed and used in accordance with the instructions, 

may cause harmful interference to radio communications. 

However, there is no guarantee that interference will not occur in a particular Installation. If 

this equipment does cause harmful interference to radio or television reception, which can be 

determined by turning the equipment off and on, the user is encouraged to try and correct the 

interference by one or more of the following measures:

- Reorient or relocate the receiving antenna.

- Increase the separation between the equipment and receiver

- Connect the equipment into an outlet on a circuit different from that to which the receiver

  is connected

- Consult the dealer or experienced radio/TV technician for help

WARNING!

This equipment may experience difficulty and/ or memory loss when subjected to any electro-

static discharge, radio frequency interference, or sudden power surge/ interruption. The user is 

encouraged to reset the equipment should any of these occur.

We recommend that you retain our address for future reference. 
Product and colors may vary. Packaging printed in China.
This product is not suitable for children under 3 years because 
of small parts - choking hazard.

 

PRINTED IN CHINA

8068

US

01

TOP

Manufactured and distributed by

© 2007 Wowwee Limited.

Product names, designations, and logos 

are trademarks or registered trademarks 

of Wowwee Limited.  All rights reserved.

Wowwee Limited

Asia Office

Unit 301A-C, 92 Granville Rd

T.S.T. East, Hong Kong

Wowwee Group

 

North America Office

6600 Decarie, Suite 200

Montreal, QC H3X 2K4, Canada

Consumer Hotline: 1-800-310-3033

Email: support@wowwee.com

www.wowwee.com

www.robopandaonline.com

Summary of Contents for ROBOPANDA 8068















Reviews: