WowWee ROBOPET 8096, User Manual

GUARD MODE

1)  you can tell robopet™ to guard his environment by pressing the 

guard mode button      . Robopet™ will make a sound to confirm 
the command and then sit down.

2)  in guard mode, robopet™ will use his sound sensor and infrared 

vision sensors to react to movement and sound nearby.

3)  when he detects a disturbance robopet™ will react by standing 

up and making a lot of noise.  after this display he will sit down 
again and continue to guard.

4)  guard mode lasts 30 minutes before robopet™ puts himself into 

sleep mode.

5)  you can end guard mode at any time by pressing the guard mode 

button again. if robopet™ was disturbed he will let you know with 
a sequence of growls and pants.  if he was not disturbed he will 
simply stand up.

SLEEP MODE

1)  sleep mode allows robopet™ to power down and still keep his 

training and programming in memory.

2)  press and hold stop / sleep for about 5 seconds to enter sleep 

mode.  robopet™ will sit down and make a noise.

3)  in sleep mode, robopet™ will not respond to any controller 

buttons apart from the wake up command.

4)  to wake robopet™ up, press and hold the stop / sleep button for 

about 5 seconds.

5)  If Robopet™ does not receive any commands for about 10 minutes, 

he will enter Sleep Mode (a battery saving shut-down function). 

Advanced Operation

9