1080p IP Streaming Encoder/Decoder
23
1) Select the "IR Routing" tab in the IP Streaming Management interface.
2) Verify, which Encoders and Decoders are joined together. Click on the device tile
you want to see the connection status of. All joined together tiles will be highlighted
blue.
3) To pair devices, drag the tile representing the Encoder (TX) and drop it over the
desired Decoder (RX) to create one-way communication.
4) To create a bi-directional IR path on a pair of Encoder (TX) and Decoder (RX), two
separate pairings are required. Repeat the step above, but in reverse (drop TX on
RX) to create the second pairing.
5.7.1 Assign Encoder to all Decoders
To distribute IR data from a single encoder to all decoders, drag and drop the
respective encoder’s tile onto the tile labeled "Group ALL" in the "Decoders" section of
the "IR Routing" tab.
5.7.2 Sending IR Data from IP Streaming Management to a Third-party Device
1) Click menu icon of the respective encoder or decoder tile.
2) Select "Device Options".