Modular Matrix Switcher 32x32
20
4. Control Operations
4.1. Front Panel Button control
Users can control Modular Matrix Switcher 32x32 rapidly and directly with its front
panel buttons. To switch AV signal, please operate the buttons under the following
format:
Format: “
Input Channel
” + “
AV
” +“
Output Channel
”+“
Enter
”
Note:
1)
“Input Channel”: Fill with the number of input channel to be controlled,
2)
“Output Channel”: Fill with the number of output channels to be controlled. Press
“All” to select all the outputs.
3)
Use “
,
” button to separate multiple I/O channels, and press “
ENTER
” button to
confirm the operation.
4)
The input/output channels on the rear panel are counting from left to right, top to
bottom.
5)
The input delay time between two numbers of every input& output channel must
be less than 5 seconds; otherwise the operation will be cancelled.
Example:
1. To transfer input 1 to output 11, press input “
1
”, output “
1
” “
1
” and “
Enter
”.
2. To transfer signals from input 1 to all output channels, press buttons in this
order: “
1
”, “
All
”.
Other Functional Buttons:
Buttons
Description
Operation
UNDO
return to the previous
status
Status 1: Input 6 -> output 6
Press input “6” + “AV”+ output 4 to change
the connection. Press “Undo” to return to
Status 1.
ß
Backspace the last
operation
If you press buttons “1”, “AV”, “2”, “
ß
” in
order, then “2” will be canceled.
THROUGH
Get straight I/O
connection, e.g. input
1-> output 1, input 2->
output 2.
Format: “Input C”Through”
If you press buttons “ALL”, “THROUGH” in
order, then the result will be like input 1
à
output 1, input 2
à
output 2, input 3
à
output
3 … input 16
à
output 16.
