Woyo PDR007, Manual

03

Before using this device, you must read the instructions. If the instructions are not followed 

carefully, the operator could suffer injury, the device could be damaged, or the car being 

treated might be damaged.

Attention before use(Warning)

1.Not suitable for operation by those with pacemakers or artificial limbs with metal parts.

2.Before using this device, you must wear a safety mask, safety gloves, and safety 

clothing to avoid being burned during use.

3.Operators must not have any metal objects on their person during operation, including 

but not limited to watches, cuff links, keys, belt buckles, coins, or zippers.

4.This device cannot be operated in areas with conductive particulate matter, areas used 

for applying paint, areas housing or handling chemical fuels, areas of high temperature, 

and areas of high humidity.

5.Once the device is powered on, flammable objects must be kept away from the device.

6.Before you power on the device, make sure that you have a fire extinguisher on hand 

in case any misoperation causes a fire.

7.Do not use this device in the vicinity of safety airbags.

8.Once the device is powered, there must be personnel on site to watch over the device. 

When the device is not in use, unplug the device's power cable.

9.This device should be stored at temperatures between 0 and 50 celsius. When 

transporting the device, avoid vibrations or shocks.

Attention in using (Warning)

1.While the restoration head is restoring a damaged car body, the temperatures of 

both the restoration head and the body will rapidly increase. Do not touch either the 

restoration head or the car body before they have had time to cool down.

2.While the restoration head is in the process of restoration, the temperatures of both 

the restoration head and the damaged area will rapidly increase. Using the restoration 

head on one area for too long may increase temperatures to the point of damaging the 

car's paint job (it is recommended that every 1-1.5 seconds, the operator wipes down 

the damaged area with a wet rag in order to keep the temperature manageable).

3.During the restoration process, the temperatures of both the restoration head and the 

damaged area will rapidly increase and the body of the car will immediately become 

softer. During restoration, make sure the restoration head is not applying pressure to the 

car, otherwise the restoration process itself might further dent the car.